| griddap
| Subset
| tabledap
| Make A Graph
| wms
| files
| Title
| Summary
| FGDC
| ISO 19115
| Info
| Background Info
| RSS
| Email
| Institution
| Dataset ID
|
|
| https://erddap.emso.eu/erddap/tabledap/Emso_Azores_Chemini_IRON.subset
| https://erddap.emso.eu/erddap/tabledap/Emso_Azores_Chemini_IRON
| https://erddap.emso.eu/erddap/tabledap/Emso_Azores_Chemini_IRON.graph
|
|
| EMSO Azores Seamon-East Chemini dissolved iron concentration
| This dataset contains dissolved iron concentrations ((Fe(II) + Fe(III); µmol/l) acquired between September 2013 and July 2017 using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory. Measured properties: temperature and Total dissolved iron concentration\n\ncdm_data_type = TimeSeries\nVARIABLES:\nplatform_code\nplatform_name\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, millimole/m3)\nIRON_QC (Total iron quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Azores_Chemini_IRON_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Azores_Chemini_IRON_iso19115.xml
| https://erddap.emso.eu/erddap/info/Emso_Azores_Chemini_IRON/index.htmlTable
| http://www.oceansites.org
| https://erddap.emso.eu/erddap/rss/Emso_Azores_Chemini_IRON.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Azores_Chemini_IRON&showErrors=false&email=
| Ifremer Institut Francais de Recherche pour l'Exploitation de la Mer
| Emso_Azores_Chemini_IRON
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.graph
|
|
| EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2016-2017
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2016-2017_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2016-2017_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-1_2016-2017/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-1_2016-2017.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2016-2017&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-1_2016-2017
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.graph
|
|
| EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2017-2018
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2017-2018_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2017-2018_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-1_2017-2018/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-1_2017-2018.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2017-2018&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-1_2017-2018
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.graph
|
|
| EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2018-2019
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2018-2019_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2018-2019_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-1_2018-2019/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-1_2018-2019.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2018-2019&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-1_2018-2019
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2021-2022.graph
|
|
| EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2021-2022
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2021-2022_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2021-2022_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-1_2021-2022/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-1_2021-2022.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2021-2022&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-1_2021-2022
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.graph
|
|
| EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2017-2018
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2017-2018_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2017-2018_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-2_2017-2018/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-2_2017-2018.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2017-2018&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-2_2017-2018
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.graph
|
|
| EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2018-2019
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2018-2019_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2018-2019_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-2_2018-2019/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-2_2018-2019.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2018-2019&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-2_2018-2019
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.graph
|
|
| EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2019-2020
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2019-2020_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2019-2020_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-2_2019-2020/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-2_2019-2020.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2019-2020&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-2_2019-2020
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.graph
|
|
| EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2020-2021
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2020-2021_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2020-2021_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-2_2020-2021/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-2_2020-2021.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2020-2021&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-2_2020-2021
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.graph
|
|
| EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2016-2017
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2016-2017_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2016-2017_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-3_2016-2017/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-3_2016-2017.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2016-2017&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-3_2016-2017
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.graph
|
|
| EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2017-2018
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2017-2018_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2017-2018_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-3_2017-2018/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-3_2017-2018.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2017-2018&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-3_2017-2018
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.graph
|
|
| EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2018-2019
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2018-2019_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2018-2019_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-3_2018-2019/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-3_2018-2019.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2018-2019&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-3_2018-2019
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.graph
|
|
| EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2019-2020
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2019-2020_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2019-2020_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-3_2019-2020/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-3_2019-2020.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2019-2020&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-3_2019-2020
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.graph
|
|
| EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2020-2021
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2020-2021_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2020-2021_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-3_2020-2021/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-3_2020-2021.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2020-2021&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-3_2020-2021
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2021-2022.graph
|
|
| EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2021-2022
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2021-2022_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2021-2022_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-3_2021-2022/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-3_2021-2022.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2021-2022&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-3_2021-2022
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.graph
|
|
| EMSO Azores TCM3-A Ocean Bottom Tilt Current Meter : 2020-2021
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-A_2020-2021_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-A_2020-2021_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-A_2020-2021/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-A_2020-2021.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-A_2020-2021&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-A_2020-2021
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.graph
|
|
| EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2020-2021
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-B_2020-2021_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-B_2020-2021_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-B_2020-2021/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-B_2020-2021.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-B_2020-2021&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-B_2020-2021
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-B_2021-2022.graph
|
|
| EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2021-2022
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-B_2021-2022_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-B_2021-2022_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-B_2021-2022/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-B_2021-2022.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-B_2021-2022&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-B_2021-2022
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.graph
|
|
| EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2020-2021
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-C_2020-2021_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-C_2020-2021_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-C_2020-2021/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-C_2020-2021.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-C_2020-2021&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-C_2020-2021
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-C_2021-2022.graph
|
|
| EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2021-2022
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-C_2021-2022_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-C_2021-2022_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-C_2021-2022/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-C_2021-2022.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-C_2021-2022&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-C_2021-2022
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.graph
|
|
| EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2020-2021
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-D_2020-2021_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-D_2020-2021_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-D_2020-2021/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-D_2020-2021.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-D_2020-2021&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-D_2020-2021
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-D_2021-2022.graph
|
|
| EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2021-2022
| The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-D_2021-2022_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-D_2021-2022_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-D_2021-2022/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-D_2021-2022.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-D_2021-2022&showErrors=false&email=
| IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer
| EMSO-AZORES_TCM3-D_2021-2022
|
|
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014.subset
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014.graph
|
|
| EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2014-2015)
| The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nDEPH (depth of measurements, Metres)\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nPRES (pressure, Decibars)\nPRES_QC (Pressure quality flag)\n... (22 more variables)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014_iso19115.xml
| https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014/index.htmlTable
| http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014&showErrors=false&email=
| MIO UMR 7294 CNRS / OSU Pytheas
| Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014
|
|
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015.subset
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015.graph
|
|
| EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2015-2016)
| The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nDEPH (depth of measurements, Metres)\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nPRES (pressure, Decibars)\nPRES_QC (Pressure quality flag)\n... (16 more variables)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015_iso19115.xml
| https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015/index.htmlTable
| http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015&showErrors=false&email=
| MIO UMR 7294 CNRS / OSU Pytheas
| Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015
|
|
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016.subset
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016.graph
|
|
| EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2016-2017)
| The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nDEPH (depth of measurements, Metres)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nRFVL_X (Metres per second)\nRFVL_Y (Y_North, Metres per second)\nLRZA (Metres per second)\nXYZ_QC\n... (22 more variables)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016_iso19115.xml
| https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016/index.htmlTable
| http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016&showErrors=false&email=
| MIO UMR 7294 CNRS / OSU Pytheas
| Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016
|
|
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018.subset
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018.graph
|
|
| EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2018-2019)
| The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nDEPH (depth of measurements, Metres)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nRFVL_X (Metres per second)\nRFVL_Y (Y_North, Metres per second)\nLRZA (Metres per second)\nXYZ_QC\n... (22 more variables)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018_iso19115.xml
| https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018/index.htmlTable
| http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018&showErrors=false&email=
| MIO UMR 7294 CNRS / OSU Pytheas
| Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018
|
|
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021.subset
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021.graph
|
|
| EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF files from 2021-07)
| The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nDEPH (depth of measurements, Metres)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nRFVL_X (Metres per second)\nRFVL_Y (Y_North, Metres per second)\nLRZA (Metres per second)\nXYZ_QC\n... (22 more variables)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021_iso19115.xml
| https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021/index.htmlTable
| http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021&showErrors=false&email=
| MIO UMR 7294 CNRS / OSU Pytheas
| Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021
|
|
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017.subset
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017.graph
|
|
| EMSO Western Ligurian : MII, AQUADOPP sensor (NetCDF files from 2017-09)
| The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nDEPH (depth of measurements, Metres)\nRFVL_X (Metres per second)\nRFVL_Y (Y_North, Metres per second)\nLRZA (Metres per second)\nXYZ_QC\n... (22 more variables)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017_iso19115.xml
| https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017/index.htmlTable
| http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017&showErrors=false&email=
| MIO UMR 7294 CNRS / OSU Pytheas
| Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012.graph
|
|
| EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2011-2012
| This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2011 and March 2012 (n=1780) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, without in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2011-2012.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2011-2012&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_CHEMINI_Total-Iron_2011-2012
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014.graph
|
|
| EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2013-2014
| This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between September 2013 and February 2014 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2013-2014.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2013-2014&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_CHEMINI_Total-Iron_2013-2014
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.graph
|
|
| EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2014-2015
| This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2014 and August 2014 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF1) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2014-2015.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2014-2015&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_CHEMINI_Total-Iron_2014-2015
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.graph
|
|
| EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2016-2017
| This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between September 2016 and February 2017 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF1) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2016-2017.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2016-2017&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_CHEMINI_Total-Iron_2016-2017
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.graph
|
|
| EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2017-2018
| This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2017 and March 2018 (n=168) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2017-2018.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2017-2018&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_CHEMINI_Total-Iron_2017-2018
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.graph
|
|
| EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2018-2019
| This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between August 2018 and December 2018 (n=445) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2018-2019.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2018-2019&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_CHEMINI_Total-Iron_2018-2019
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020.graph
|
|
| EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2019-2020
| This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2019 and Septembre 2020 (n=1620) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with weekly in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nIRON (Total iron, umol/l)\nIRON_QC (Total iron quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_CHEMINI_Total-Iron_2019-2020.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_CHEMINI_Total-Iron_2019-2020&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_CHEMINI_Total-Iron_2019-2020
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.graph
|
|
| EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2013-2014
| This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between August 2013 and July 2014 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2013-2014.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2013-2014&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_Seamon-East_Optode-O2_2013-2014
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.graph
|
|
| EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2015-2016
| This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between April 2015 and September 2016 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2015-2016.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2015-2016&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_Seamon-East_Optode-O2_2015-2016
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.graph
|
|
| EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2016-2017 (Tempo)
| This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) (and the associated sensor raw data) acquired between September 2016 and February 2017 using an Aanderaa optode (model 4330, sensor head #2133, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2016-2017.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2016-2017&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_Seamon-East_Optode-O2_2016-2017
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.graph
|
|
| EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations, 2012-2013
| This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between July 2012 and August 2013 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure). The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\nOSAT (Oxygen saturation, percent)\nOSAT_QC (Oxygen saturation quality flag)\nDOXY (Dissolved oxygen, umol/l)\nDOXY_QC (Dissolved oxygen quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Seamon-East_Optode-O2_2012-2013.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Seamon-East_Optode-O2_2012-2013&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_Seamon-East_Optode-O2_2012-2013
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2011-2012.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2011-2012
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2011-2012.graph
|
|
| EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2011-2012
| This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2011 and July 2012 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2011-2012_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2011-2012_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2011-2012/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2011-2012.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2011-2012&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_Wetlabs_Turbidity_2011-2012
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2012-2013.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2012-2013
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2012-2013.graph
|
|
| EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2012-2013
| This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2012 and August 2013 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2012-2013_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2012-2013_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2012-2013/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2012-2013.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2012-2013&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_Wetlabs_Turbidity_2012-2013
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2013-2014.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2013-2014
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2013-2014.graph
|
|
| EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2013-2014
| This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between August 2013 and July 2014 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2013-2014_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2013-2014_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2013-2014/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2013-2014.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2013-2014&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_Wetlabs_Turbidity_2013-2014
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2015-2016.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2015-2016
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2015-2016.graph
|
|
| EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2015-2016
| This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between April 2015 and September 2016 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2015-2016_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2015-2016_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2015-2016/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2015-2016.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2015-2016&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_Wetlabs_Turbidity_2015-2016
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2016-2017.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2016-2017
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2016-2017.graph
|
|
| EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2016-2017
| This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between September 2016 and February 2017 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2016-2017_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2016-2017_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2016-2017/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2016-2017.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2016-2017&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_Wetlabs_Turbidity_2016-2017
|
|
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2017-2018.subset
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2017-2018
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Wetlabs_Turbidity_2017-2018.graph
|
|
| EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2017-2018
| This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2017 and July 2018 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node deployed at ca 10m away from the active hydrothermal edifice Tour Eiffel.\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nTUR4 (Turbidity, NTU)\nTUR4_QC (Turbidity quality flag)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Wetlabs_Turbidity_2017-2018_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Wetlabs_Turbidity_2017-2018_iso19115.xml
| https://erddap.emso.eu/erddap/info/EMSO-AZORES_Wetlabs_Turbidity_2017-2018/index.htmlTable
| https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Wetlabs_Turbidity_2017-2018.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Wetlabs_Turbidity_2017-2018&showErrors=false&email=
| Ifremer IPGP
| EMSO-AZORES_Wetlabs_Turbidity_2017-2018
|
|
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023.subset
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023.graph
|
|
| EMSO-LO Western Ligurian : BJS_Bathydock_Bathybot Aquadopp sensor (NetCDF files from 2023-09-20)
| EMSO-LO Western Ligurian : BathyBot, Aquadopp sensor (Network Common Data Format (NetCDF) files from 2023-04-28). The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstation_id (station name, Not applicable)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nPosition_QC (quality flag for position)\nDEPH (depth of measurements, Metres)\nDeph_QC (Profondeur quality flag)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTime_QC (Time quality flag)\nEWCT (X_East eastward_sea_water_velocity, Metres per second)\nNSCT (Y_North northward_sea_water_velocity, Metres per second)\n... (26 more variables)\n
| https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023_fgdc.xml
| https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023_iso19115.xml
| https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023/index.htmlTable
| http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023.rss
| https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023&showErrors=false&email=
| MIO UMR 7294 CNRS / OSU Pytheas
| Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023
|
