Easier access to scientific data
Brought to you by NOAA NMFS SWFSC ERD
|
ERDDAP
Easier access to scientific data |
|
Brought to you by NOAA NMFS SWFSC ERD |
| griddap | Subset | tabledap | Make A Graph | wms | files | Title | Summary | FGDC | ISO 19115 | Info | Background Info | RSS | Institution | Dataset ID | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| https://erddap.emso.eu/erddap/tabledap/IBMA-CSV_EGIM_ADCP_D01_20220531_to_20221006_v002.subset | https://erddap.emso.eu/erddap/tabledap/IBMA-CSV_EGIM_ADCP_D01_20220531_to_20221006_v002 | https://erddap.emso.eu/erddap/tabledap/IBMA-CSV_EGIM_ADCP_D01_20220531_to_20221006_v002.graph | EGIM Workhorse ADCP Data at 200m Jun-Oct 2022 in front of Cape St. Vincent, Sagres, PT | The dataset contains water column (bottom) parameters acquired through set of sensors mounted on a fixe platform (EGIM): Teledyne RDI 300kHz Workhorse Monitor direct-reading Acoustic Doppler Current Profiler (ADCP) (ocean currents) at 200 m\nSampling period is: 60 minutes (ADCP), 66 bins á 3 m, Blank: 1.76 m\n\ncdm_data_type = Point\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nPOSITION_QC (quality flag for LATITUDE and LONGITUDE)\nSVEL (Sound velocity in sea water, Metres per second)\nBINNUMBR (Bin number)\nHDNG (Heading, Percent)\nPTCH (Pitch, Percent)\nROLL (Percent)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (quality flag for TEMP)\nHCSP (Horizontal current speed, Metres per second)\nHCSP_QC (quality flag for HCSP)\nHCDT (Current to direction relative true north, Degrees True)\nHCDT_QC (quality flag for HCDT)\nEWCT (West-east current component, Metres per second)\nEWCT_QC (quality flag for EWCT)\nNSCT (South-north current component, Metres per second)\nNSCT_QC (quality flag for NSCT)\nVSP (Bottom-up current component, Metres per second)\nVSP_QC (quality flag for VSP)\nLERR (Velocity error, Metres per second)\nTNIH01 (Echo intensity beam 1, count)\nTNIH02 (Echo intensity beam 2, count)\nTNIH03 (Echo intensity beam 3, count)\nTNIH04 (Echo intensity beam 4, count)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/IBMA-CSV_EGIM_ADCP_D01_20220531_to_20221006_v002_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/IBMA-CSV_EGIM_ADCP_D01_20220531_to_20221006_v002_iso19115.xml | https://erddap.emso.eu/erddap/info/IBMA-CSV_EGIM_ADCP_D01_20220531_to_20221006_v002/index.htmlTable | https://www.ccmar.ualg.pt/
| https://erddap.emso.eu/erddap/rss/IBMA-CSV_EGIM_ADCP_D01_20220531_to_20221006_v002.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=IBMA-CSV_EGIM_ADCP_D01_20220531_to_20221006_v002&showErrors=false&email= | Algarve Centre of Marine Sciences (CCMAR), Portuguese Institute for Sea and Atmosphere(IPMA) | IBMA-CSV_EGIM_ADCP_D01_20220531_to_20221006_v002 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2016-2017.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2016-2017 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2016-2017_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2016-2017_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-1_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-1_2016-2017.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2016-2017&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2016-2017 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2017-2018.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2017-2018_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2017-2018_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-1_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-1_2017-2018.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2017-2018 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-1_2018-2019.graph | EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-1_2018-2019_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-1_2018-2019_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-1_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-1_2018-2019.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-1_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-1_2018-2019 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2017-2018.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2017-2018_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2017-2018_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-2_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-2_2017-2018.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2017-2018 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2018-2019.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2018-2019_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2018-2019_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-2_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-2_2018-2019.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2018-2019 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2019-2020.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2019-2020 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2019-2020_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2019-2020_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-2_2019-2020/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-2_2019-2020.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2019-2020&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2019-2020 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-2_2020-2021.graph | EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-2_2020-2021_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-2_2020-2021_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-2_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-2_2020-2021.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-2_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-2_2020-2021 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2016-2017.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2016-2017 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2016-2017_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2016-2017_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-3_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-3_2016-2017.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2016-2017&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2016-2017 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2017-2018.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2017-2018 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2017-2018_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2017-2018_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-3_2017-2018/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-3_2017-2018.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2017-2018&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2017-2018 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2018-2019.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2018-2019 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2018-2019_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2018-2019_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-3_2018-2019/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-3_2018-2019.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2018-2019&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2018-2019 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2019-2020.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2019-2020 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2019-2020_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2019-2020_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-3_2019-2020/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-3_2019-2020.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2019-2020&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2019-2020 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-3_2020-2021.graph | EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-3_2020-2021_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-3_2020-2021_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-3_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-3_2020-2021.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-3_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-3_2020-2021 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-A_2020-2021.graph | EMSO Azores TCM3-A Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-A_2020-2021_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-A_2020-2021_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-A_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-A_2020-2021.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-A_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-A_2020-2021 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-B_2020-2021.graph | EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-B_2020-2021_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-B_2020-2021_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-B_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-B_2020-2021.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-B_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-B_2020-2021 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-C_2020-2021.graph | EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-C_2020-2021_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-C_2020-2021_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-C_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-C_2020-2021.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-C_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-C_2020-2021 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_TCM3-D_2020-2021.graph | EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2020-2021 | The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, Montségur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nHCSP (Horizontal current speed, m/s)\nHCSP_QC (Horizontal current speed quality flag)\nHCDT (Current to direction relative true north, deg T)\nHCDT_QC (Current to direction relative true north quality flag)\nNSCT (South-north current component, m/s)\nNSCT_QC (South-north current component quality flag)\nEWCT (West-east current component, m/s)\nEWCT_QC (West-east current component quality flag)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (Sea temperature quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_TCM3-D_2020-2021_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_TCM3-D_2020-2021_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_TCM3-D_2020-2021/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_TCM3-D_2020-2021.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_TCM3-D_2020-2021&showErrors=false&email= | IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer | EMSO-AZORES_TCM3-D_2020-2021 | |||
| https://erddap.emso.eu/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents.subset | https://erddap.emso.eu/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents | https://erddap.emso.eu/erddap/tabledap/Emso_Ligure_Dyfamed_TScurrents.graph | EMSO Ligure Dyfamed mooring currentmeter data | Temperature, conductivity and pressure data collected from MOOSE moorings\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (Depth of each measurement, m)\nTEMP (Sea temperature, degree_Celsius)\nTEMP_QC (quality flag)\nPRES (Sea pressure, decibar)\nPRES_QC (quality flag)\nHCSP (Horizontal current speed, meter/second)\nHCSP_QC (quality flag)\nHCDT (Current to direction relative true north, degree)\nHCDT_QC (quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Ligure_Dyfamed_TScurrents_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Ligure_Dyfamed_TScurrents_iso19115.xml | https://erddap.emso.eu/erddap/info/Emso_Ligure_Dyfamed_TScurrents/index.htmlTable | http://www.insu.cnrs.fr/environnement/atmosphere/moose-mediterranean-ocean-observing-system-on-environment
| https://erddap.emso.eu/erddap/rss/Emso_Ligure_Dyfamed_TScurrents.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Ligure_Dyfamed_TScurrents&showErrors=false&email= | Observatoire Océanologique de Villefranche-sur-Mer | Emso_Ligure_Dyfamed_TScurrents | |||
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014.subset | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014 | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014.graph | EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2014-2015) | The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nDEPH (depth of measurements, Metres)\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nPRES (pressure, Decibars)\nPRES_QC (Pressure quality flag)\n... (22 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014_iso19115.xml | https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014&showErrors=false&email= | MIO UMR 7294 CNRS / OSU Pytheas | Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2014 | |||
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015.subset | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015 | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015.graph | EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2015-2016) | The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nDEPH (depth of measurements, Metres)\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nPRES (pressure, Decibars)\nPRES_QC (Pressure quality flag)\n... (16 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015_iso19115.xml | https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015&showErrors=false&email= | MIO UMR 7294 CNRS / OSU Pytheas | Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2015 | |||
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016.subset | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016 | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016.graph | EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2016-2017) | The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nDEPH (depth of measurements, Metres)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nRFVL_X (Metres per second)\nRFVL_Y (Y_North, Metres per second)\nLRZA (Metres per second)\nXYZ_QC\n... (22 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016_iso19115.xml | https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016&showErrors=false&email= | MIO UMR 7294 CNRS / OSU Pytheas | Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2016 | |||
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018.subset | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018 | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018.graph | EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2018-2019) | The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nDEPH (depth of measurements, Metres)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nRFVL_X (Metres per second)\nRFVL_Y (Y_North, Metres per second)\nLRZA (Metres per second)\nXYZ_QC\n... (22 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018_iso19115.xml | https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018&showErrors=false&email= | MIO UMR 7294 CNRS / OSU Pytheas | Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2018 | |||
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021.subset | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021 | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021.graph | EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF files 2021-07 to 2023-05) | The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nDEPH (depth of measurements, Metres)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nRFVL_X (Metres per second)\nRFVL_Y (Y_North, Metres per second)\nLRZA (Metres per second)\nXYZ_QC\n... (22 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021_iso19115.xml | https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021&showErrors=false&email= | MIO UMR 7294 CNRS / OSU Pytheas | Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2021 | |||
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2024.subset | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2024 | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2024.graph | EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF files from 2024-03) | The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name, N/A)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nDEPH (depth of measurements, Metres)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nEWCT (X_East, Metres per second)\nNSCT (Y_North, Metres per second)\nVCSP (Metres per second)\nXYX_QC (Current Velocity Quality Code)\n... (22 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2024_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2024_iso19115.xml | https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2024/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2024.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2024&showErrors=false&email= | MIO UMR 7294 CNRS / OSU Pytheas | Emso_Western_Ligurian_Albatross_Aquadopp_NetCDF_2024 | |||
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017.subset | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017 | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017.graph | EMSO Western Ligurian : MII, AQUADOPP sensor (NetCDF files from 2017-09) | The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstationname (station name)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nDEPH (depth of measurements, Metres)\nRFVL_X (Metres per second)\nRFVL_Y (Y_North, Metres per second)\nLRZA (Metres per second)\nXYZ_QC\n... (22 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017_iso19115.xml | https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017&showErrors=false&email= | MIO UMR 7294 CNRS / OSU Pytheas | Emso_Western_Ligurian_MII_Aquadopp_NetCDF_2017 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011.graph | EMSO-Azores, BOREL : Meteorological unit 1 data, 2010-2011 | This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in hPa) acquired in july 2011 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Borel_Meteo-Unit-1_2010-2011 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012.graph | EMSO-Azores, BOREL : Meteorological unit 1 data, 2011-2012 | This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between July 2011 and July 2012 (n=2826) using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Borel_Meteo-Unit-1_2011-2012 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013.graph | EMSO-Azores, BOREL : Meteorological unit 1 data, 2012-2013 | This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between July 2012 and August 2013 (n=1880) using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Borel_Meteo-Unit-1_2012-2013 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014.graph | EMSO-Azores, BOREL : Meteorological unit 1 data, 2013-2014 | This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between August 2013 and July 2014 (n=2540) using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Borel_Meteo-Unit-1_2013-2014 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015.graph | EMSO-Azores, BOREL : Meteorological unit 1 data, 2014-2015 | This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between July 2014 and April 2015 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Borel_Meteo-Unit-1_2014-2015 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016.graph | EMSO-Azores, BOREL : Meteorological unit 1 data, 2015-2016 | This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between April 2015 and September 2016 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Borel_Meteo-Unit-1_2015-2016 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017.graph | EMSO-Azores, BOREL : Meteorological unit 1 data, 2016-2017 | This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between September 2016 and July 2017 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Borel_Meteo-Unit-1_2016-2017 | |||
| https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017.subset | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017 | https://erddap.emso.eu/erddap/tabledap/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017.graph | EMSO-Azores, BOREL : Meteorological unit 2 data, 2016-2017 | This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between September 2016 and July 2017 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).\n\ncdm_data_type = TimeSeries\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\ndepth (m)\nDEPH_QC (Depth quality flag)\nWDIR (Wind from direction relative true north, deg T)\nWDIR_QC (Wind from direction relative true north quality flag)\nWSPD (Horizontal wind speed, m/s)\nWSPD_QC (Horizontal wind speed quality flag)\nATMS (Atmospheric pressure at sea level, mBar)\nATMS_QC (Atmospheric pressure at sea level quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature in dry bulb quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017_iso19115.xml | https://erddap.emso.eu/erddap/info/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017/index.htmlTable | https://wwz.ifremer.fr/
| https://erddap.emso.eu/erddap/rss/EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017&showErrors=false&email= | Ifremer IPGP | EMSO-AZORES_Borel_Meteo-Unit-2_2016-2017 | |||
| https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023.subset | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023 | https://erddap.emso.eu/erddap/tabledap/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023.graph | EMSO-LO Western Ligurian : BJS_Bathydock_Bathybot Aquadopp sensor (NetCDF files from 2023-09-20) | EMSO-LO Western Ligurian : BathyBot, Aquadopp sensor (Network Common Data Format (NetCDF) files from 2023-04-28). The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstation_id (station name, Not applicable)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nPosition_QC (quality flag for position)\nDEPH (depth of measurements, Metres)\nDeph_QC (Profondeur quality flag)\ntime (time of measurements, seconds since 1970-01-01T00:00:00Z)\nTime_QC (Time quality flag)\nEWCT (X_East eastward_sea_water_velocity, Metres per second)\nNSCT (Y_North northward_sea_water_velocity, Metres per second)\n... (26 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023_iso19115.xml | https://erddap.emso.eu/erddap/info/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023/index.htmlTable | http://www.emso-fr.org/EMSO-France
| https://erddap.emso.eu/erddap/rss/Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023&showErrors=false&email= | MIO UMR 7294 CNRS / OSU Pytheas | Emso_Western_Ligurian_Bathybot_Aquadopp_NetCDF_2023 | |||
| https://erddap.emso.eu/erddap/tabledap/IBMA-CSV_ADCP_d02_20220531_to_20221006_v002.subset | https://erddap.emso.eu/erddap/tabledap/IBMA-CSV_ADCP_d02_20220531_to_20221006_v002 | https://erddap.emso.eu/erddap/tabledap/IBMA-CSV_ADCP_d02_20220531_to_20221006_v002.graph | Sentinel ADCP Data at 150m Jun-Oct 2022 in front of Cape St.Vincent, Sagres, PT | This dataset contains data collected with a Teledyne RDI Sentinel V100 300 kHz Acoustic Doppler Current Profiler (ADCP), mounted in a upward facing subsurface buoy.\nData are collected every hour for 3.0m depth bins. Blank 2.0m\n\ncdm_data_type = Point\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nPOSITION_QC (quality flag for LATITUDE and LONGITUDE)\nSVEL (Sound velocity in sea water, Metres per second)\nBINNUMBR (Bin number)\nHDNG (Heading, degrees)\nPTCH (Pitch, degrees)\nROLL (degrees)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (quality flag for TEMP)\nHCSP (Horizontal current speed, Metres per second)\nHCSP_QC (quality flag for HCSP)\nHCDT (Current to direction relative true north, Degrees True)\nHCDT_QC (quality flag for HCDT)\nEWCT (West-east current component, Metres per second)\nEWCT_QC (quality flag for EWCT)\nNSCT (South-north current component, Metres per second)\nNSCT_QC (quality flag for NSCT)\nVSP (Bottom-up current component, Metres per second)\nVSP_QC (quality flag for VSP)\nLERR (Velocity error, Metres per second)\nTNIH01 (Echo intensity beam 1, count)\nTNIH02 (Echo intensity beam 2, count)\nTNIH03 (Echo intensity beam 3, count)\n... (9 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/IBMA-CSV_ADCP_d02_20220531_to_20221006_v002_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/IBMA-CSV_ADCP_d02_20220531_to_20221006_v002_iso19115.xml | https://erddap.emso.eu/erddap/info/IBMA-CSV_ADCP_d02_20220531_to_20221006_v002/index.htmlTable | https://www.ccmar.ualg.pt/
| https://erddap.emso.eu/erddap/rss/IBMA-CSV_ADCP_d02_20220531_to_20221006_v002.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=IBMA-CSV_ADCP_d02_20220531_to_20221006_v002&showErrors=false&email= | Algarve Centre of Marine Sciences (CCMAR), Portuguese Institute for Sea and Atmosphere(IPMA) | IBMA-CSV_ADCP_d02_20220531_to_20221006_v002 | |||
| https://erddap.emso.eu/erddap/tabledap/IBMA-CSV_ADCP_d01_20210524_to_20210609_v002.subset | https://erddap.emso.eu/erddap/tabledap/IBMA-CSV_ADCP_d01_20210524_to_20210609_v002 | https://erddap.emso.eu/erddap/tabledap/IBMA-CSV_ADCP_d01_20210524_to_20210609_v002.graph | Sentinel ADCP Data at 150m May-June 2021 in front of Cape St. Vincent, Sagres, PT | This dataset contains data collected with a Teledyne RDI Sentinel V100 300 kHz Acoustic Doppler Current Profiler (ADCP), mounted in a upward facing subsurface buoy.\nData are collected every hour for 3.0m depth bins. Blank 2.0m\n\ncdm_data_type = Point\nVARIABLES:\ntime (seconds since 1970-01-01T00:00:00Z)\nlatitude (Latitude of each location, degrees_north)\nlongitude (Longitude of each location, degrees_east)\nPOSITION_QC (quality flag for LATITUDE and LONGITUDE)\nSVEL (Sound velocity in sea water, Metres per second)\nBINNUMBR (Bin number)\nHDNG (Heading, degrees)\nPTCH (Pitch, degrees)\nROLL (degrees)\nTEMP (Sea temperature, degree_C)\nTEMP_QC (quality flag for TEMP)\nHCSP (Horizontal current speed, Metres per second)\nHCSP_QC (quality flag for HCSP)\nHCDT (Current to direction relative true north, Degrees True)\nHCDT_QC (quality flag for HCDT)\nEWCT (West-east current component, Metres per second)\nEWCT_QC (quality flag for EWCT)\nNSCT (South-north current component, Metres per second)\nNSCT_QC (quality flag for NSCT)\nVSP (Bottom-up current component, Metres per second)\nVSP_QC (quality flag for VSP)\nLERR (Velocity error, Metres per second)\nTNIH01 (Echo intensity beam 1, count)\nTNIH02 (Echo intensity beam 2, count)\nTNIH03 (Echo intensity beam 3, count)\n... (9 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/IBMA-CSV_ADCP_d01_20210524_to_20210609_v002_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/IBMA-CSV_ADCP_d01_20210524_to_20210609_v002_iso19115.xml | https://erddap.emso.eu/erddap/info/IBMA-CSV_ADCP_d01_20210524_to_20210609_v002/index.htmlTable | https://www.ccmar.ualg.pt/
| https://erddap.emso.eu/erddap/rss/IBMA-CSV_ADCP_d01_20210524_to_20210609_v002.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=IBMA-CSV_ADCP_d01_20210524_to_20210609_v002&showErrors=false&email= | Algarve Centre of Marine Sciences (CCMAR), Portuguese Institute for Sea and Atmosphere(IPMA) | IBMA-CSV_ADCP_d01_20210524_to_20210609_v002 | |||
| https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy01.subset | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy01 | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy01.graph | W1M3A data (201401-201506) | Data from W1M3A observatory (012014-062015)\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstation_id (Not applicable)\ntime (Time of measurement, seconds since 1970-01-01T00:00:00Z)\ntime_QC (Time quality flag)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nposition_QC (Position quality flag)\ndepth (Depth of measurements, m)\nDEPTH_QC (Depth quality flag)\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nPSAL (practical salinity, Parts per thousand)\nPSAL_QC (Salinity quality flag)\nPRES (pressure exterted by seawater and overlying atmosphere, Decibars)\nPRES_QC (Sea pressure quality flag)\nATMS (Atmospheric pressure at sea level, Hectopascals)\nATMS_QC (Atmospheric pressure quality flag)\nWSPD (Horizontal wind speed, Metres per second)\nWSPD_QC (Horizontal wind speed quality flag)\nWDIR (Wind from direction relative true north, degrees)\nWDIR_QC (Wind direction quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature quality flag)\nRELH (Relative humidity, Percent)\nRELH_QC (Relative humidity quality flag)\nSINC (Shortwave/solar incoming radiation, Watts per square metre)\nSINC_QC (Shortwave radiation quality flag)\nLINC (Longwave/atmospheric incoming radiation, Watts per square metre)\nLINC_QC (Longwave radiation quality flag)\nPRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)\nPRRT_QC (Precipitation quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/W1M3A_deploy01_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/W1M3A_deploy01_iso19115.xml | https://erddap.emso.eu/erddap/info/W1M3A_deploy01/index.htmlTable | http://www.w1m3a.cnr.it
| https://erddap.emso.eu/erddap/rss/W1M3A_deploy01.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=W1M3A_deploy01&showErrors=false&email= | Consiglio Nazionale delle Ricerche | W1M3A_deploy01 | |||
| https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy02.subset | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy02 | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy02.graph | W1M3A data (201506-201606) | Data from W1M3A observatory (062015-062016)\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstation_id (Not applicable)\ntime (Time of measurement, seconds since 1970-01-01T00:00:00Z)\ntime_QC (Time quality flag)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nposition_QC (Position quality flag)\ndepth (Depth of measurements, m)\nDEPTH_QC (Depth quality flag)\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nPSAL (practical salinity, Parts per thousand)\nPSAL_QC (Salinity quality flag)\nPRES (pressure exterted by seawater and overlying atmosphere, Decibars)\nPRES_QC (Sea pressure quality flag)\nATMS (Atmospheric pressure at sea level, Hectopascals)\nATMS_QC (Atmospheric pressure quality flag)\nWSPD (Horizontal wind speed, Metres per second)\nWSPD_QC (Horizontal wind speed quality flag)\nWDIR (Wind from direction relative true north, degrees)\nWDIR_QC (Wind direction quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature quality flag)\nRELH (Relative humidity, Percent)\nRELH_QC (Relative humidity quality flag)\nSINC (Shortwave/solar incoming radiation, Watts per square metre)\nSINC_QC (Shortwave radiation quality flag)\nLINC (Longwave/atmospheric incoming radiation, Watts per square metre)\nLINC_QC (Longwave radiation quality flag)\nPRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)\nPRRT_QC (Precipitation quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/W1M3A_deploy02_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/W1M3A_deploy02_iso19115.xml | https://erddap.emso.eu/erddap/info/W1M3A_deploy02/index.htmlTable | http://www.w1m3a.cnr.it
| https://erddap.emso.eu/erddap/rss/W1M3A_deploy02.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=W1M3A_deploy02&showErrors=false&email= | Consiglio Nazionale delle Ricerche | W1M3A_deploy02 | |||
| https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy03.subset | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy03 | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy03.graph | W1M3A data (201607-201705) | Data from W1M3A observatory (072016-052017)\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstation_id (Not applicable)\ntime (Time of measurement, seconds since 1970-01-01T00:00:00Z)\ntime_QC (Time quality flag)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nposition_QC (Position quality flag)\ndepth (Depth of measurements, m)\nDEPTH_QC (Depth quality flag)\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nPSAL (practical salinity, Parts per thousand)\nPSAL_QC (Salinity quality flag)\nPRES (pressure exterted by seawater and overlying atmosphere, Decibars)\nPRES_QC (Sea pressure quality flag)\nATMS (Atmospheric pressure at sea level, Hectopascals)\nATMS_QC (Atmospheric pressure quality flag)\nWSPD (Horizontal wind speed, Metres per second)\nWSPD_QC (Horizontal wind speed quality flag)\nWDIR (Wind from direction relative true north, degrees)\nWDIR_QC (Wind direction quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature quality flag)\nRELH (Relative humidity, Percent)\nRELH_QC (Relative humidity quality flag)\nSINC (Shortwave/solar incoming radiation, Watts per square metre)\nSINC_QC (Shortwave radiation quality flag)\nLINC (Longwave/atmospheric incoming radiation, Watts per square metre)\nLINC_QC (Longwave radiation quality flag)\nPRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)\nPRRT_QC (Precipitation quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/W1M3A_deploy03_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/W1M3A_deploy03_iso19115.xml | https://erddap.emso.eu/erddap/info/W1M3A_deploy03/index.htmlTable | http://www.w1m3a.cnr.it
| https://erddap.emso.eu/erddap/rss/W1M3A_deploy03.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=W1M3A_deploy03&showErrors=false&email= | Consiglio Nazionale delle Ricerche | W1M3A_deploy03 | |||
| https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy04.subset | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy04 | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy04.graph | W1M3A data (201705-201806) | Data from W1M3A observatory (052017-062018)\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstation_id (Not applicable)\ntime (Time of measurement, seconds since 1970-01-01T00:00:00Z)\ntime_QC (Time quality flag)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nposition_QC (Position quality flag)\ndepth (Depth of measurements, m)\nDEPTH_QC (Depth quality flag)\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nPSAL (practical salinity, Parts per thousand)\nPSAL_QC (Salinity quality flag)\nPRES (pressure exterted by seawater and overlying atmosphere, Decibars)\nPRES_QC (Sea pressure quality flag)\nATMS (Atmospheric pressure at sea level, Hectopascals)\nATMS_QC (Atmospheric pressure quality flag)\nWSPD (Horizontal wind speed, Metres per second)\nWSPD_QC (Horizontal wind speed quality flag)\nWDIR (Wind from direction relative true north, degrees)\nWDIR_QC (Wind direction quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature quality flag)\nRELH (Relative humidity, Percent)\nRELH_QC (Relative humidity quality flag)\nSINC (Shortwave/solar incoming radiation, Watts per square metre)\nSINC_QC (Shortwave radiation quality flag)\nLINC (Longwave/atmospheric incoming radiation, Watts per square metre)\nLINC_QC (Longwave radiation quality flag)\nPRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)\nPRRT_QC (Precipitation quality flag)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/W1M3A_deploy04_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/W1M3A_deploy04_iso19115.xml | https://erddap.emso.eu/erddap/info/W1M3A_deploy04/index.htmlTable | http://www.w1m3a.cnr.it
| https://erddap.emso.eu/erddap/rss/W1M3A_deploy04.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=W1M3A_deploy04&showErrors=false&email= | Consiglio Nazionale delle Ricerche | W1M3A_deploy04 | |||
| https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy05.subset | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy05 | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy05.graph | W1M3A data (202010-202107) | Data from W1M3A observatory (102020-072021)\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstation_id (Not applicable)\ntime (Time of measurement, seconds since 1970-01-01T00:00:00Z)\ntime_QC (Time quality flag)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nposition_QC (Position quality flag)\ndepth (Depth of measurements, m)\nDEPTH_QC (Depth quality flag)\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nPSAL (practical salinity, Parts per thousand)\nPSAL_QC (Salinity quality flag)\nFLU2 (Chlorophyll-a fluorescence, mg m-3)\nFLU2_QC (Chlorophyll-a fluorescence quality flag)\nTUR4 (Turbidity of water in the water body, NTU)\nTUR4_QC (Turbidity quality flag)\nPRES (pressure exterted by seawater and overlying atmosphere, Decibars)\nPRES_QC (Sea pressure quality flag)\nATMS (Atmospheric pressure at sea level, Hectopascals)\nATMS_QC (Atmospheric pressure quality flag)\nWSPD (Horizontal wind speed, Metres per second)\nWSPD_QC (Horizontal wind speed quality flag)\nWDIR (Wind from direction relative true north, degrees)\nWDIR_QC (Wind direction quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature quality flag)\nRELH (Relative humidity, Percent)\n... (7 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/W1M3A_deploy05_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/W1M3A_deploy05_iso19115.xml | https://erddap.emso.eu/erddap/info/W1M3A_deploy05/index.htmlTable | http://www.w1m3a.cnr.it
| https://erddap.emso.eu/erddap/rss/W1M3A_deploy05.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=W1M3A_deploy05&showErrors=false&email= | Consiglio Nazionale delle Ricerche | W1M3A_deploy05 | |||
| https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy06.subset | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy06 | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy06.graph | W1M3A data (202107-202204) | Data from W1M3A observatory (072021-042022)\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstation_id (Not applicable)\ntime (Time of measurement, seconds since 1970-01-01T00:00:00Z)\ntime_QC (Time quality flag)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nposition_QC (Position quality flag)\ndepth (Depth of measurements, m)\nDEPTH_QC (Depth quality flag)\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nPSAL (practical salinity, Parts per thousand)\nPSAL_QC (Salinity quality flag)\nFLU2 (Chlorophyll-a fluorescence, mg m-3)\nFLU2_QC (Chlorophyll-a fluorescence quality flag)\nTUR4 (Turbidity of water in the water body, NTU)\nTUR4_QC (Turbidity quality flag)\nPRES (pressure exterted by seawater and overlying atmosphere, Decibars)\nPRES_QC (Sea pressure quality flag)\nATMS (Atmospheric pressure at sea level, Hectopascals)\nATMS_QC (Atmospheric pressure quality flag)\nWSPD (Horizontal wind speed, Metres per second)\nWSPD_QC (Horizontal wind speed quality flag)\nWDIR (Wind from direction relative true north, degrees)\nWDIR_QC (Wind direction quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\nDRYT_QC (Air temperature quality flag)\nRELH (Relative humidity, Percent)\n... (7 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/W1M3A_deploy06_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/W1M3A_deploy06_iso19115.xml | https://erddap.emso.eu/erddap/info/W1M3A_deploy06/index.htmlTable | http://www.w1m3a.cnr.it
| https://erddap.emso.eu/erddap/rss/W1M3A_deploy06.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=W1M3A_deploy06&showErrors=false&email= | Consiglio Nazionale delle Ricerche | W1M3A_deploy06 | |||
| https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy07.subset | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy07 | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy07.graph | W1M3A data (202310-202405) | Data from W1M3A observatory (102023-052024)\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstation_id (Not applicable)\ntime (Time of measurement, seconds since 1970-01-01T00:00:00Z)\ntime_QC (Time quality flag)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nposition_QC (Position quality flag)\ndepth (Depth of measurements, m)\nDEPTH_QC (Depth quality flag)\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nCNDC (conductivity, MilliSiemens per centimetre)\nCNDC_QC (Conductivity quality flag)\nDOX1 (Dissolved oxygen, Millilitres per litre)\nDOX1_QC (Conductivity quality flag)\nFLU2 (Chlorophyll-a fluorescence, Milligrams per cubic metre)\nFLU2_QC (Chlorophyll-a fluorescence quality flag)\nTUR4 (Turbidity of water in the water body, Nephelometric Turbidity Units)\nTUR4_QC (Turbidity quality flag)\nPRES (pressure exterted by seawater and overlying atmosphere, Decibars)\nPRES_QC (Sea pressure quality flag)\nATMS (Atmospheric pressure at sea level, Hectopascals)\nATMS_QC (Atmospheric pressure quality flag)\nWSPD (Horizontal wind speed, Metres per second)\nWSPD_QC (Horizontal wind speed quality flag)\nWDIR (Wind from direction relative true north, degrees)\nWDIR_QC (Wind direction quality flag)\nDRYT (Air temperature in dry bulb, degree_C)\n... (9 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/W1M3A_deploy07_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/W1M3A_deploy07_iso19115.xml | https://erddap.emso.eu/erddap/info/W1M3A_deploy07/index.htmlTable | http://www.w1m3a.cnr.it
| https://erddap.emso.eu/erddap/rss/W1M3A_deploy07.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=W1M3A_deploy07&showErrors=false&email= | Consiglio Nazionale delle Ricerche | W1M3A_deploy07 | |||
| https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy08.subset | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy08 | https://erddap.emso.eu/erddap/tabledap/W1M3A_deploy08.graph | W1M3A data (202407-...) | Data from W1M3A observatory (072024-...)\n\ncdm_data_type = TimeSeries\nVARIABLES:\nstation_id (Not applicable)\ntime (Time of measurement, seconds since 1970-01-01T00:00:00Z)\nTIME_QC (Time quality flag)\nlatitude (Latitude of measurements, degrees_north)\nlongitude (Longitude of measurements, degrees_east)\nPOSITION_QC (Position quality flag)\ndepth (Depth of measurements, m)\nDEPTH_QC (Depth quality flag)\nsensor_id\nTEMP (temperature, degree_C)\nTEMP_QC (Temperature quality flag)\nCNDC (conductivity, MilliSiemens per centimetre)\nCNDC_QC (Conductivity quality flag)\nDOX1 (Dissolved oxygen, Millilitres per litre)\nDOX1_QC (Conductivity quality flag)\nFLU2 (Chlorophyll-a fluorescence, Milligrams per cubic metre)\nFLU2_QC (Chlorophyll-a fluorescence quality flag)\nTUR4 (Turbidity of water in the water body, Nephelometric Turbidity Units)\nTUR4_QC (Turbidity quality flag)\nPRES (pressure exterted by seawater and overlying atmosphere, Decibars)\nPRES_QC (Sea pressure quality flag)\nATMS (Atmospheric pressure at sea level, Hectopascals)\nATMS_QC (Atmospheric pressure quality flag)\nWSPD (Horizontal wind speed, Metres per second)\nWSPD_QC (Horizontal wind speed quality flag)\nWDIR (Wind from direction relative true north, degrees)\nWDIR_QC (Wind direction quality flag)\n... (12 more variables)\n | https://erddap.emso.eu/erddap/metadata/fgdc/xml/W1M3A_deploy08_fgdc.xml | https://erddap.emso.eu/erddap/metadata/iso19115/xml/W1M3A_deploy08_iso19115.xml | https://erddap.emso.eu/erddap/info/W1M3A_deploy08/index.htmlTable | http://www.w1m3a.cnr.it
| https://erddap.emso.eu/erddap/rss/W1M3A_deploy08.rss | https://erddap.emso.eu/erddap/subscriptions/add.html?datasetID=W1M3A_deploy08&showErrors=false&email= | Consiglio Nazionale delle Ricerche | W1M3A_deploy08 |