Atmospheric data from an Airmar 150WX weather station at OBSEA Buoy (30min average)

Summary:
Atmospheric data collected by an Airmar 150WX weather station at OBSEA Buoy averaged every 30min

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CAPH (Atmospheric pressure, Hectopascals)
AIRT (temperature of the atmoshpere, Degrees Celsius)
WDIR (wind direction, Degrees)
WSPD (wind speed, Metres per second)
CAPH_QC (Atmospheric pressure quality control flags)
AIRT_QC (temperature of the atmoshpere quality control flags)
WDIR_QC (wind direction quality control flags)
WSPD_QC (wind speed quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


CTD data at OBSEA Underwater Observatory (30min average)

Summary:
CTD data measured at OBSEA underwater observatory

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
sensor_id (Identifier of the sensor that took the measurement)
CNDC (sea water electrical conductivity, Siemens per metre)
PSAL (sea water salinity, Dimensionless)
TEMP (in situ sea water temperature, Degrees Celsius)
SVEL (speed of sound in sea water, Metres per second)
PRES (pressure that exists in the medium of sea water, Decibars)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
SVEL_QC (speed of sound in sea water quality control flags)
PRES_QC (pressure that exists in the medium of sea water quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


CTD data at OBSEA Underwater Observatory (full data)

Summary:
CTD data measured at OBSEA underwater observatory full data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
sensor_id (Identifier of the sensor that took the measurement)
TEMP (in situ sea water temperature, Degrees Celsius)
PRES (pressure that exists in the medium of sea water, Decibars)
CNDC (sea water electrical conductivity, Siemens per metre)
PSAL (sea water salinity, Dimensionless)
SVEL (speed of sound in sea water, Metres per second)
TEMP_QC (in situ sea water temperature quality control flags)
PRES_QC (pressure that exists in the medium of sea water quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
SVEL_QC (speed of sound in sea water quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Summary:
CTD data measured at OBSEA underwater observatory full data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CNDC (sea water electrical conductivity (corrected values), Siemens per metre)
PSAL (sea water salinity (raw sensor values), Dimensionless)
TEMP (in situ sea water temperature (corrected values), Degrees Celsius)
PRES (pressure that exists in the medium of sea water (raw sensor values), Decibars)
SVEL (speed of sound in sea water (raw sensor values), Metres per second)
CNDC_RAW (sea water electrical conductivity (raw data), Siemens per metre)
CNDC_UNCERTAINTY (sea water electrical conductivity expanded uncertainty with 95% coverage (k=2), Siemens per metre)
TEMP_RAW (in situ sea water temperature (raw data), Degrees Celsius)
TEMP_UNCERTAINTY (in situ sea water temperature expanded uncertainty with 95% coverage (k=2), Degrees Celsius)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
PRES_QC (pressure that exists in the medium of sea water quality control flags)
SVEL_QC (speed of sound in sea water quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Current data from an AWAC-AST 1 MHz ADCP at OBSEA (30min average)

Summary:
Current data collected and processed by an AWAC-SN5931-AST 1 MHz at OBSEA (30min average)

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CSPD (Horizontal velocity of the water column (currents), Metres per second)
CDIR (direction towards the sea water is flowing (currents), Degrees north)
UCUR (eastward velocity of water current in the water body, Metres per second)
VCUR (northward velocity of water current in the water body, Metres per second)
ZCUR (upward velocity of water current in the water body, Metres per second)
CSPD_QC (Horizontal velocity of the water column (currents) quality control flags)
CDIR_QC (direction towards the sea water is flowing (currents) quality control flags)
UCUR_QC (eastward velocity of water current in the water body quality control flags)
VCUR_QC (northward velocity of water current in the water body quality control flags)
ZCUR_QC (upward velocity of water current in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


Current data from an AWAC-AST 1 MHz ADCP at OBSEA (full data)

Summary:
Current data collected and processed by an AWAC-SN5931-AST 1 MHz at OBSEA (full data)

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CSPD (Horizontal velocity of the water column (currents), Metres per second)
CDIR (direction towards the sea water is flowing (currents), Degrees)
UCUR (eastward velocity of water current in the water body, Metres per second)
VCUR (northward velocity of water current in the water body, Metres per second)
ZCUR (upward velocity of water current in the water body, Metres per second)
CSPD_QC (Horizontal velocity of the water column (currents) quality control flags)
CDIR_QC (direction towards the sea water is flowing (currents) quality control flags)
UCUR_QC (eastward velocity of water current in the water body quality control flags)
VCUR_QC (northward velocity of water current in the water body quality control flags)
ZCUR_QC (upward velocity of water current in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


Data from Airmar 200 WX weather station deployed at OBSEA's Besos Buoy (30min average)

Summary:
Weather station from  an Airmar 200WX deployed at OBSEA's Besos Buoy, NW mediterranean sea

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CAPH (Atmospheric pressure, Hectopascals)
AIRT (temperature of the atmoshpere, Degrees Celsius)
WDIR (wind direction, Degrees)
WSPD (wind speed, Metres per second)
CAPH_QC (Atmospheric pressure quality control flags)
AIRT_QC (temperature of the atmoshpere quality control flags)
WDIR_QC (wind direction quality control flags)
WSPD_QC (wind speed quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Data from Airmar 200 WX weather station deployed at OBSEA's Besos Buoy (full data)

Summary:
Weather station from  an Airmar 200WX deployed at OBSEA's Besos Buoy, NW mediterranean sea full sensor data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CAPH (Atmospheric pressure, Hectopascals)
AIRT (temperature of the atmoshpere, Degrees Celsius)
WDIR (wind direction, Degrees)
WSPD (wind speed, Metres per second)
CAPH_QC (Atmospheric pressure quality control flags)
AIRT_QC (temperature of the atmoshpere quality control flags)
WDIR_QC (wind direction quality control flags)
WSPD_QC (wind speed quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


dm carbon-system, OS ESTOC 2014 D pH FixO3-surface (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
PSAL (Sea Water Practical Salinity, PSU)
TEMP_QC (quality flag)
PSAL_QC (quality flag)
PHPH (sea Water pH reported on total scale, pH units)
PHPH_QC (quality flag)

Oceanic Platform of the Canary Islands- PLOCAN


dm carbon-system, OS ESTOC 2015 D pH FixO3-surface-1 (OceanSITES ESTOC in-situ data.)


dm carbon-system, OS ESTOC 2015 D pH FixO3-surface-2 (OceanSITES ESTOC in-situ data.)


dm carbon-system, OS ESTOC 2016 D buoy-ocean-1 (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
PSAL (Sea Water Practical Salinity, PSU)
DOXY (number_of_moles_ per_ unit_volume_molarity, mol m-3)
TEMP_QC (quality flag)
PSAL_QC (quality flag)
DOXY_QC (quality flag)
CPHL (total chlorophyll-a, NTU)
CPHL_QC (quality flag)
TURB_QC (quality flag)
TURB (Sea Water Turbidity, NTU)
PHPH (sea_water_pH_reported_on_total_scale is the measure of acidity of seawater, pH units)
PHPH_QC (quality flag)
PCO2 (CO2 partial pressure, matm)
PCO2_QC (quality flag)


dm carbon-system, OS ESTOC 2016 D buoy-ocean-2 (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
PSAL (Sea Water Practical Salinity, PSU)
DOXY (number_of_moles_ per_ unit_volume_molarity, mol m-3)
TEMP_QC (quality flag)
PSAL_QC (quality flag)
DOXY_QC (quality flag)
CPHL (total chlorophyll-a, NTU)
CPHL_QC (quality flag)
TURB_QC (quality flag)
TURB (Sea Water Turbidity, NTU)


dm carbon-system, OS ESTOC 2016 D pH FixO3-surface (OceanSITES ESTOC in-situ data.)


dm carbon-system, OS ESTOC 2017 D buoy-ocean-1 (OceanSITES ESTOC in-situ data.)


dm carbon-system, OS ESTOC 2017 D buoy-ocean-2 (OceanSITES ESTOC in-situ data.)


dm carbon-system, OS ESTOC 201704 D PCO2 FixO3-surface (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
PSAL (Sea Water Practical Salinity, PSU)
TEMP_QC (quality flag)
PSAL_QC (quality flag)
PCO2 (CO2 partial pressure, matm)
PCO2_QC (quality flag)


dm carbon-system, OS ESTOC 201704 D pH FixO3-surface (OceanSITES ESTOC in-situ data.)


dm carbon-system, OS ESTOC 201709 D pCO2 FixO3-surface (OceanSITES ESTOC in-situ data.)


dm carbon-system, OS ESTOC 2018 D pCO2 EMSO-surface (OceanSITES ESTOC in-situ data.)


dm carbon-system, OS ESTOC 2018 D pH EMSO-surface (OceanSITES ESTOC in-situ data.)


dm carbon-system, OS ESTOC 2019 D pH EMSO-surface (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2014 D CTD-FIXO3-surface (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
CNDC (Sea Water Electrical Conductivity, S/m)
PSAL (Sea Water Practical Salinity, PSU)
TEMP_QC (quality flag)
CNDC_QC (quality flag)
PSAL_QC (quality flag)


dm ctd-do-flntu, OS ESTOC 2014 D SST-PSAL-DOXI-CPHL-TURB FixO3-surface

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
AIRT (Air temperature, degree_C)
ATMP (Air Pressure, hPa)
RELH (Relative humidity, percent)
WDIR (Wind direction, degrees)
WSPD (Wind speed, m/s)
AIRT_QC (quality flag)
ATMP_QC (quality flag)
RELH_QC (quality flag)
WDIR_QC (quality flag)
WSPD_QC (quality flag)


dm ctd-do-flntu, OS ESTOC 2015 D CTD-FIXO3-surface (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2015 D SST-PSAL-DOXI-CPHL-TURB FixO3-surface

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
AIRT (Air temperature, degree_C)
ATMP (Air Pressure, hPa)
RELH (Relative humidity, percent)
WDIR (Wind direction, degrees)
WSPD (Wind speed, m/s)
PAR (umol per square meter and per second of photosyntetically Active Radiation, micromol/m2 s)
AIRT_QC (quality flag)
ATMP_QC (quality flag)
RELH_QC (quality flag)
WDIR_QC (quality flag)
WSPD_QC (quality flag)
PAR_QC (quality flag)


dm ctd-do-flntu, OS ESTOC 2015 D SST-PSAL-DOXI-DOXITEMP-CPHL FixO3-surface

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
PSAL (sea water practical salinity, PSU)
DOXY (number_of_moles_ per_ unit_volume_molarity, micromol/l)
TEMP_QC (quality flag)
PSAL_QC (quality flag)
DOXY_QC (quality flag)
CPHL (total chlorophyll-a, MicrograMMes/l)
CPHL_QC (quality flag)


dm ctd-do-flntu, OS ESTOC 201505 D FLNTU FixO3-100m (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
CPHL (Mass concentration of chlorophyll per unit volume of sea water (total chlorophyll-a), NTU)
CPHL_QC (quality flag)
TURB_QC (quality flag)
TURB (Turbidity of water in the water body, NTU)


dm ctd-do-flntu, OS ESTOC 201505 D FLNTU-FIX03-100m (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
CPHL (total chlorophyll-a, NTU)
CPHL_QC (quality flag)
TURB_QC (quality flag)
TURB (Sea Water Turbidity, NTU)


dm ctd-do-flntu, OS ESTOC 201510 D CTD-FixO3-100m (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
CNDC (Sea Water Electrical Conductivity, S/m)
PSAL (Sea Water Practical Salinity, PSU)
DEPTH_SENSOR (Depth of each measurement, meters)
TEMP_QC (quality flag)
CNDC_QC (quality flag)
PSAL_QC (quality flag)
DEPTH_SENSOR_QC (quality flag)


dm ctd-do-flntu, OS ESTOC 2016 D CTD FixO3-1-surface (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2016 D CTD FixO3-2-surface (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2016 D FLNTU FixO3-surface (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
CPHL (Concentration Of Chlorophyll-A, NTU)
CPHL_QC (quality flag)
TURB_QC (quality flag)
TURB (Sea Water Turbidity, NTU)


dm ctd-do-flntu, OS ESTOC 2016 D PCO2 FixO3-surface (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
PSAL (Sea Water Practical Salinity, PSU)
TEMP_QC (quality flag)
PSAL_QC (quality flag)
PCO2_QC (quality flag)
PCO2 (Surface Partial Pressure Of Carbon Dioxide In Sea Water, ppm)


dm ctd-do-flntu, OS ESTOC 2016 D SST-PSAL-DOXI-DOXITEMP-CPHL-TURB FixO3-surface

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
PSAL (Sea Water Practical Salinity, PSU)
TEMP_QC (quality flag)
PSAL_QC (quality flag)
DOXY (number_of_moles_ per_ unit_volume_molarity, mol m-3)
DOXY_QC (quality flag)
CPHL (total chlorophyll-a, NTU)
CPHL_QC (quality flag)
TURB_QC (quality flag)
TURB (Sea Water Turbidity, NTU)


dm ctd-do-flntu, OS ESTOC 201609 D CTD-DO-FIX03-80m (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 201610 D CTD-DO-FIX03-150m (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
CNDC (Sea Water Electrical Conductivity, S/m)
PSAL (Sea Water Practical Salinity, PSU)
DOXY (number_of_moles_ per_ unit_volume_molarity, mol m-3)
DEPTH_SENSOR (Depth of each measurement, meters)
TEMP_QC (quality flag)
CNDC_QC (quality flag)
PSAL_QC (quality flag)
DOXY_QC (quality flag)


dm ctd-do-flntu, OS ESTOC 201610 D FLNTU FixO3-140m (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2017 D CTD FixO3-1-surface (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2017 D CTD FixO3-2-surface (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2017 D FLNTU FixO3-surface (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2017 D SST-PSAL-DOXI-DOXITEMP-CPHL-TURB FixO3-surface

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
PSAL (Practical_Salinity_S_P_is_a_determination_of_the_salinity_ of_sea_water_based_on_its_electrical_conductance., PSU)
DOXY (dissolved oxygen, mol m-3)
TEMP_DOXY (sea temperature from oxygen sensor, degree_Celsius)
TEMP_QC (quality flag)
PSAL_QC (quality flag)
DOXY_QC (quality flag)
TEMP_DOXY_QC
CPHL (Mass concentration of chlorophyll per unit volume of sea water (total chlorophyll-a), NTU)
CPHL_QC (quality flag)
TURB_QC (quality flag)
TURB (Turbidity of water in the water body, NTU)


dm ctd-do-flntu, OS ESTOC 201704 D CTD-DO-FixO3-150m (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 201704 D CTD-DO-FixO3-80m (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 201704 D CTD-FixO3-1600m (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_Celsius)
CNDC (Sea Water Electrical Conductivity, S/m)
PSAL (Sea Water Practical Salinity, PSU)
DEPTH_SENSOR (Depth of each measurement, meters)
TEMP_QC (quality flag)
CNDC_QC (quality flag)
PSAL_QC (quality flag)


dm ctd-do-flntu, OS ESTOC 201704 D FLNTU-FixO3-80m (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2018 D CTD FixO3-2-surface (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2018 D SST-PSAL-DOXI-DOXITEMP-CPHL-TURB EMSO-surface


dm ctd-do-flntu, OS ESTOC 201805 D CTD-DO FixO3-150m (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 201805 D CTD-DO-EMSO-150m (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 201805 D CTD-FixO3-1600m (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2019 D EMSO SST-PSAL-DOXI-DOXITEMP-CPHL-TURB surface


dm ctd-do-flntu, OS ESTOC 2019 D EMSO-1-surface (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 2019 D EMSO-2-surface (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 201902 D CTD-DO-EMSO-150m (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC 201902 D CTD-DO-EMSO-80m (OceanSITES ESTOC in-situ data.)


dm ctd-do-flntu, OS ESTOC-1 200311 D CTD ANIMATE-10m (OceanSITES ESTOC in-situ data)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Temperature, degree_Celsius)
TEMP_QC (quality flag)
CNDC (sea water electrical conductivity, mS/cm)
CNDC_QC (quality flag)
PRES (Sea Water Pressure, decibar)
PRES_QC (quality flag)
PSAL (sea water salinity, PSU)
PSAL_QC (quality flag)


dm ctd-do-flntu, OS ESTOC-1 200412 P CTD ANIMATE-MultipleDepths (OceanSITES ESTOC in-situ data)


dm ctd-do-flntu, OS ESTOC-1 200503 P CTD ANIMATE-MultipleDepths (OceanSITES ESTOC in-situ data)


dm ctd-do-flntu, OS ESTOC-1 200511 P CTD ANIMATE-MultipleDepths (OceanSITES ESTOC in-situ data)


dm ctd-do-flntu, OS ESTOC-1 200603 P CTD ANIMATE-MultipleDepths (OceanSITES ESTOC in-situ data)


dm ctd-do-flntu, OS ESTOC-1 200611 P CTD ANIMATE-MultipleDepths (OceanSITES ESTOC in-situ data)


dm ctd-do-flntu, OS ESTOC-1 200703 P CTD ANIMATE-MultipleDepths (OceanSITES ESTOC in-situ data)


dm ctd-do-flntu, OS ESTOC-1 200711 P CTD ANIMATE-MultipleDepths (OceanSITES ESTOC in-situ data)


dm ctd-do-flntu, OS ESTOC-2 200204 D CTD ANIMATE-MultipleDepths (OceanSITES ESTOC in-situ data)


dm ctd-do-flntu, OS ESTOC-2 200304 D CTD ANIMATE-MultipleDepths (OceanSITES ESTOC in-situ data)


dm ctd-do-flntu, OS ESTOC-2 200311 D CTD ANIMATE-MultipleDepths (OceanSITES ESTOC in-situ data)


dm ctd-do-flntu, OS ESTOC-2 200404 R CTD ANIMATE-MultipleDepths (OceanSITES ESTOC in-situ data)


dm currents, OS ESTOC 201505 D ADCP FixO3 80mUpward (OceanSITES ESTOC in-situ data.) [TIME][DEPTH]

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
CDIR (Current direction of the sea water, degrees)
CSPD (Current speed of the sea water, m/s)
CDIR_QC (quality flag)
CSPD_QC (quality flag)


dm currents, OS ESTOC 201510 D ADCP FixO3 80mUpward (OceanSITES ESTOC in-situ data.) [TIME][DEPTH]


dm currents, OS ESTOC 201610 D ADCP FixO3 100mUpward (OceanSITES ESTOC in-situ data.) [TIME][DEPTH]


dm currents, OS ESTOC 201610 D ADCP FixO3 80mUpward (OceanSITES ESTOC in-situ data.) [TIME][DEPTH]


dm currents, OS ESTOC 201610 D Currentmeter FixO3-150m (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Surface Temperature, degree_C)
DEPTH_SENSOR (Depth of each measurement, meters)
TEMP_QC (quality flag)
CDIR (Current direction of the sea water, degrees)
CSPD (Current speed of the sea water, m/s)
HEADING (Motion and orientation of the ADCP, degrees)
PITCH (Motion and orientation of the ADCP, degrees)
ROLL (Motion and orientation of the ADCP, degrees)
CDIR_QC (quality flag)
CSPD_QC (quality flag)


dm currents, OS ESTOC 201704 D ADCP FixO3 80mUpward (OceanSITES ESTOC in-situ data.) [TIME][DEPTH]


dm currents, OS ESTOC 201704 D Currentmeter FixO3-150m (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
TEMP (Sea Water Temperature, degree_C)
DEPTH_SENSOR (Depth and ancillary variable obtained through pressure measurements, meters)
TEMP_QC (quality flag)
CDIR (Current direction of the sea water, degrees)
CSPD (Current speed of the sea water, m/s)
HEADING (Motion and orientation of the ADCP, degrees)
PITCH (Motion and orientation of the ADCP, degrees)
ROLL (Motion and orientation of the ADCP, degrees)
CDIR_QC (quality flag)
CSPD_QC (quality flag)


dm currents, OS ESTOC 201805 D ADCP FixO3 1mdownward (OceanSITES ESTOC in-situ data.) [TIME][DEPTH]


dm currents, OS ESTOC 201805 D ADCP FixO3 80mUpward (OceanSITES ESTOC in-situ data.) [TIME][DEPTH]


dm currents, OS ESTOC 201805 D Currentmeter FixO3-150m (OceanSITES ESTOC in-situ data.) [TIME]

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time]):
HEADING (Motion and orientation of the ADCP, degrees)


dm currents, OS ESTOC 201902 D ADCP EMSO 80mUpward (OceanSITES ESTOC in-situ data.) [TIME][DEPTH]


dm currents, OS ESTOC 201902 D Currentmeter EMSO 150m (OceanSITES ESTOC in-situ data.)


dm meteo, OS ESTOC PLOCAN 2003-2008 D ANIMATE-MERSEA (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
AIRT (Air temperature, degree_C)
ATMP (Air Pressure, hPa)
RELH (Relative humidity, percent)
AIRT_QC (quality flag)
ATMP_QC (quality flag)
RELH_QC (quality flag)


dm meteo, OS ESTOC-PLOCAN 2014 D EuroSITES (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
AIRT (Air temperature, degree_C)
ATMP (Air Pressure, hPa)
RELH (Relative humidity, percent)
WDIR (Wind direction, degrees)
WSPD (Wind speed, m/s)
AIRT_QC (quality flag)
ATMP_QC (quality flag)
RELH_QC (quality flag)
WDIR_QC (quality flag)
WSPD_QC (quality flag)


dm meteo, OS ESTOC-PLOCAN 2014 D FIXO3 (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time]):
AIRT (Air temperature, degree_C)
RELH (Relative humidity, percent)
ATMP (Air Pressure, hPa)
WDIR (Wind direction, degrees)
WSPD (Wind speed, m/s)
AIRT_QC (quality flag for air_temperature)
RELH_QC (quality flag for relative_humidity)
ATMP_QC (quality flag for air_pressure)
WDIR_QC (quality flag for wind_direction)
WSPD_QC (quality flag for wind_speed)


dm meteo, OS ESTOC-PLOCAN 2015 D FIXO3 (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time]):
AIRT (Air temperature, degree_C)
RELH (Relative humidity, percent)
ATMP (Air Pressure, hPa)
WDIR (Wind direction, degrees)
WSPD (Wind speed, m/s)
PAR (umol per square meter and per second of photosyntetically Active Radiation, micromol/m2 s)
AIRT_QC (quality flag for air_temperature)
RELH_QC (quality flag for relative_humidity)
ATMP_QC (quality flag for air_pressure)
WDIR_QC (quality flag for wind_direction)
WSPD_QC (quality flag for wind_speed)
PAR_QC (quality flag for mumol_per_square_meter_and_second_of_photosyntetically_Active_Radiation)


dm meteo, OS ESTOC-PLOCAN 2015-2016 D-FIXO3 (OceanSITES ESTOC in-situ data.)

Summary:
OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time][depth]):
AIRT (Air temperature, degree_C)
ATMP (Air Pressure, hPa)
RELH (Relative humidity, percent)
WDIR (Wind direction, degrees)
WSPD (Wind speed, m/s)
PAR (umol per square meter and per second of photosyntetically Active Radiation, micromol/m2 s)
AIRT_QC (quality flag)
ATMP_QC (quality flag)
RELH_QC (quality flag)
WDIR_QC (quality flag)
WSPD_QC (quality flag)
PAR_QC (quality flag)


dm meteo, OS ESTOC-PLOCAN 2016 D-FIXO3 (OceanSITES ESTOC in-situ data.)


dm meteo, OS ESTOC-PLOCAN 2017 D-FIXO3 (OceanSITES ESTOC in-situ data.)


dm meteo, OS ESTOC-PLOCAN 2017-2018 D-FIXO3 (OceanSITES ESTOC in-situ data.)


dm meteo, OS ESTOC-PLOCAN 2019 D meteorology-surface (OceanSITES ESTOC in-situ data.)


Summary:
E2M3A METEO timeSeries, NRT in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (m)
WDIR (wind from direction relative true north, Degrees)
WDIR_QC (wind from direction relative true north quality flag)
WSPD (horizontal wind speed, Metres per second)
WSPD_QC (horizontal wind speed quality flag)
DRYT (air temperature in dry bulb, Degrees Celsius)
DRYT_QC (air temperature in dry bulb quality flag)
ATMS (atmospheric pressure at sea level, Millibars)
ATMS_QC (atmospheric pressure at sea level quality flag)
RELH (relative humidity, Percent)
RELH_QC (relative humidity quality flag)
HEAD (Parameters that describe the displacement of platforms or instruments in space relative to various origins, Degrees)
HEAD_QC (The magnetically-corrected compass direction towards which a structure bearing sensors or sampling devices is pointing. quality flag)
EWSB (wind speed, Metres per second)
EWSB_QC (wind speed quality flag)
GSPD (gust wind speed, Metres per second)
GSPD_QC (gust wind speed quality flag)
GDIR (Direction (from) of wind (gust) relative to True North {wind direction} in the atmosphere, Degrees)
GDIR_QC (The direction from which a gust event (generally regarded as an increase over sustained speed of more than 5 m/s lasting less than 20 seconds) is blowing quality flag)

National Institute of Oceanography and Applied Geophysics - OGS, Division of Oceanography


Summary:
E2M3A MRDT timeSeries, NRT in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (m)
CSLR (Solar Radiation, Watts per square metre)
CSLR_QC (Solar Radiation quality flag)
TMES_1 (Temperature of radiometer case, Kelvins)
TMES_1_QC (Temperature of radiometer case quality flag)
TMES_2 (Temperature of radiometer dome, Kelvins)
TMES_2_QC (Temperature of radiometer dome quality flag)
LWRD (Long-wave radiation, Watts per square metre)
LWRD_QC (Long-wave radiation quality flag)


Summary:
E2M3A PCO2PROA timeSeries, NRT in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (m)
PCO2 (co2 partial pressure, Parts per million)
PCO2_QC (co2 partial pressure quality flag)
TMES (Pressure of gas stream, Millibars)
TMES_QC (Pressure of gas stream quality flag)


Summary:
E2M3A PCO2PROW timeSeries, NRT in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (m)
PCO2 (co2 partial pressure, Parts per million)
PCO2_QC (co2 partial pressure quality flag)
TMES (Pressure of gas stream, Millibars)
TMES_QC (Pressure of gas stream quality flag)


Summary:
E2M3A SAMI timeSeries, NRT in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (m)
PSAL (practical salinity, Dimensionless)
PSAL_QC (practical salinity quality flag)
TEMP (sea potential temperature, Degrees Celsius)
TEMP_QC (sea potential temperature quality flag)
PHPH (ph, pH units)
PHPH_QC (ph quality flag)


Summary:
E2M3A SBE16PLS timeSeries, NRT in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (m)
TEMP (sea potential temperature, Degrees Celsius)
TEMP_QC (sea potential temperature quality flag)
CNDC (electrical conductivity, Siemens per metre)
CNDC_QC (electrical conductivity quality flag)
PRES (sea pressure, Decibars)
PRES_QC (sea pressure quality flag)
DOX1 (dissolved oxygen, Millilitres per litre)
DOX1_QC (dissolved oxygen quality flag)
PSAL (practical salinity, Dimensionless)
PSAL_QC (practical salinity quality flag)
SVEL (sound velocity, Metres per second)
SVEL_QC (sound velocity quality flag)


Summary:
E2M3A SBE37O timeSeries, NRT in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (m)
TEMP (sea potential temperature, Degrees Celsius)
TEMP_QC (sea potential temperature quality flag)
CNDC (electrical conductivity, Siemens per metre)
CNDC_QC (electrical conductivity quality flag)
DOX1 (dissolved oxygen, Millilitres per litre)
DOX1_QC (dissolved oxygen quality flag)
PSAL (practical salinity, Dimensionless)
PSAL_QC (practical salinity quality flag)
SVEL (sound velocity, Metres per second)
SVEL_QC (sound velocity quality flag)


Summary:
E2M3A timeSeries ALL INSTRUMENTS, NRT in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (m)
CPWC (Includes all variants of chlorophyll expressed in terms of per unit volume, per unit area of any body of fresh or salt water, or as a relative colour index (e.g. PCI). Does not include data expressed per unit mass of SPM., Micrograms per litre)
CPWC_QC (chlorophyll_concentration_in_sea_water quality flag)
TUR4 (turbidity, Nephelometric Turbidity Units)
TUR4_QC (turbidity quality flag)
CDOM (Parts per billion)
CDOM_QC (cdom quality flag)
TEMP_1 (sea potential temperature, Degrees Celsius)
TEMP_1_QC (sea potential temperature quality flag)
WDIR (wind from direction relative true north, Degrees)
WDIR_QC (wind from direction relative true north quality flag)
WSPD (horizontal wind speed, Metres per second)
WSPD_QC (horizontal wind speed quality flag)
DRYT (air temperature in dry bulb, Degrees Celsius)
DRYT_QC (air temperature in dry bulb quality flag)
ATMS (atmospheric pressure at sea level, Millibars)
ATMS_QC (atmospheric pressure at sea level quality flag)
RELH (relative humidity, Percent)
RELH_QC (relative humidity quality flag)
HEAD (Parameters that describe the displacement of platforms or instruments in space relative to various origins, Degrees)
HEAD_QC (The magnetically-corrected compass direction towards which a structure bearing sensors or sampling devices is pointing. quality flag)
EWSB (wind speed, Metres per second)
EWSB_QC (wind speed quality flag)
GSPD (gust wind speed, Metres per second)
... (47 more variables)


Summary:
E2M3A timeSeries, data collected from 2021 to 2022

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (m)
WDIR (Wind from direction relative true north, Degrees)
WDIR_QC (Wind from direction relative true north quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
DRYT (Air temperature in dry bulb, Degrees Celsius)
DRYT_QC (Air temperature in dry bulb quality flag)
ATMS (Atmospheric pressure at sea level, Millibars)
ATMS_QC (Atmospheric pressure at sea level quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
GSPD (Gust wind speed, Metres per second)
GSPD_QC (Gust wind speed quality flag)
GDIR (Gust wind from direction relative true north, Degrees)
GDIR_QC (Gust wind from direction relative true north quality flag)
PHPH (Ph, pH units)
PHPH_QC (Ph quality flag)
DOX1 (Dissolved oxygen, Millilitres per litre)
DOX1_QC (Dissolved oxygen quality flag)
TEMP (Sea temperature, Degrees Celsius)
TEMP_QC (Sea temperature quality flag)
CNDC (Electrical conductivity, Siemens per metre)
CNDC_QC (Electrical conductivity quality flag)
PSAL (Practical salinity, 1)
... (9 more variables)


EGIM Aanderaa Oxygen Data at 200m Jun-Oct 2022 in front of Cape St. Vincent, Sagres, PT

Summary:
The dataset contains water column (bottom) parameters acquired through set of sensors mounted on a fixe platform (EGIM): Aanderaa 4831dw (optical dissolved oxygen). Sampling period is:15 minutes. Measured channels: Temperature, Dissolved O2 concentration.Derived channels: Dissolved O2 saturation

cdm_data_type = Point
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
POSITION_QC (quality flag for LATITUDE and LONGITUDE)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
OSAT (Oxygen saturation, Percent)
DOXY (Dissolved oxygen, Micromoles per litre)
OSAT_QC (quality flag for OSAT)
DOXY_QC (quality flag for DOXY)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag for TEMP)

Portuguese Institute for Sea and Atmosphere(IPMA), Algarve Centre of Marine Sciences (CCMAR)


EGIM RBR Pressure Data at 200m June-Oct 2022 in front of Cape St. Vincent, Sagres, PT

Summary:
The dataset contains water column (bottom) parameters acquired through set of sensors mounted on a fixe platform (EGIM): RBR Quartz 3 BPR (absolute pressure). Sampling period is: 30 seconds. Measured channels: Temperature, Pressure. Derived channels: Sea pressure, Depth

cdm_data_type = Point
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
depth (m)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag for TEMP)
PRST (Sea pressure, Decibars)
PRST_QC (quality flag for PRST)
DEPH_QC (quality flag for DEPH)
POSITION_QC (quality flag for LATITUDE and LONGITUDE)


EGIM Seabird CT Data at 200m Jun-Oct 2022 in front of Cape St. Vincent, Sagres, PT

Summary:
The dataset contains water column (bottom) parameters acquired through set of sensors mounted on a fixe platform (EGIM): SeaBird SBE37 (Conductivity, Temperature). Sampling period is: 15 minutes. Measured channels: Conductivity, Temperature. Derived channels: Salinity, Speed of sound

cdm_data_type = Point
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
POSITION_QC (quality flag for LATITUDE and LONGITUDE)
TEMP (Sea temperature, Degrees Celsius)
TEMP_QC (quality flag for TEMP)
CNDC (Electrical conductivity, Siemens per metre)
CNDC_QC (quality flag for CNDC)
PSAL (Practical salinityÂ of the water body, Dimensionless)
PSAL_QC (quality flag for PSAL)
SVEL (Sound velocity in sea water, Metres per second)


EGIM WETlabs Turbidity Data at 200m June-Oct 2022 in front of Cape St. Vincent, Sagres, PT

Summary:
The dataset contains water column (bottom) parameters acquired through set of sensors mounted on a fixe platform (EGIM): WETLabs ECO-Nephelometric Turbidity Units (NTU) (Turbidity). Sampling period is: 15 minutes. Sampling period is: 15 minutes. Measured channels:Turbidity.

cdm_data_type = Point
VARIABLES:
TUR4 (Turbidity, Nephelometric Turbidity Units)
TUR4_QC (quality flag for TUR4)
POSITION_QC (quality flag for LATITUDE and LONGITUDE)
time (seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)


EGIM Workhorse ADCP Data at 200m Jun-Oct 2022 in front of Cape St. Vincent, Sagres, PT

Summary:
The dataset contains water column (bottom) parameters acquired through set of sensors mounted on a fixe platform (EGIM):   Teledyne RDI 300kHz WorkhorseÂ Monitor direct-reading Acoustic Doppler Current Profiler (ADCP) (ocean currents) at 200 m
Sampling period is: 60 minutes (ADCP), 66 bins Ã¡ 3 m, Blank: 1.76 m

cdm_data_type = Point
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
POSITION_QC (quality flag for LATITUDE and LONGITUDE)
SVEL (Sound velocity in sea water, Metres per second)
BINNUMBR (Bin number)
HDNG (Heading, Percent)
PTCH (Pitch, Percent)
ROLL (Percent)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag for TEMP)
HCSP (Horizontal current speed, Metres per second)
HCSP_QC (quality flag for HCSP)
HCDT (Current to direction relative true north, Degrees True)
HCDT_QC (quality flag for HCDT)
EWCT (West-east current component, Metres per second)
EWCT_QC (quality flag for EWCT)
NSCT (South-north current component, Metres per second)
NSCT_QC (quality flag for NSCT)
VSP (Bottom-up current component, Metres per second)
VSP_QC (quality flag for VSP)
LERR (Velocity error, Metres per second)
TNIH01 (Echo intensity beam 1, count)
TNIH02 (Echo intensity beam 2, count)
TNIH03 (Echo intensity beam 3, count)
TNIH04 (Echo intensity beam 4, count)

Algarve Centre of Marine Sciences (CCMAR), Portuguese Institute for Sea and Atmosphere(IPMA)


EMSO Azores Seamon-East Chemini dissolved iron concentration

Summary:
This dataset contains dissolved iron concentrations ((Fe(II) + Fe(III); µmol/l) acquired between September 2013 and July 2017 using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory. Measured properties: temperature and Total dissolved iron concentration

cdm_data_type = TimeSeries
VARIABLES:
platform_code
platform_name
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TEMP (Sea temperature, degree_Celsius)
TEMP_QC (Sea temperature quality flag)
IRON (Total iron, millimole/m3)
IRON_QC (Total iron quality flag)

Ifremer Institut Francais de Recherche pour l'Exploitation de la Mer


EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2016-2017

Summary:
The TCM-3 Ocean Bottom Tilt Current Meter from Lowell Instruments LLC (North Falmouth, MA, USA) measures current using the drag-tilt principle. The logger is buoyant and is anchored to the bottom via a short flexible tether. Drag from moving water tilts the logger in the direction of flow. The logger's accelerometer and magnetometer channels are used to record the amount of tilt and direction of tilt (compass bearing). The array currentmeters are deployed near the Tour Eiffel, MontsÃ©gur and White Castle hydrothermal vent sites. The array is not connected to an energy node. The currentmeter's internal clocks are set to UTC time before deployment. Clock drift after recovery is not implemented in data but added as metadata in the file

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
HCSP (Horizontal current speed, m/s)
HCSP_QC (Horizontal current speed quality flag)
HCDT (Current to direction relative true north, deg T)
HCDT_QC (Current to direction relative true north quality flag)
NSCT (South-north current component, m/s)
NSCT_QC (South-north current component quality flag)
EWCT (West-east current component, m/s)
EWCT_QC (West-east current component quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)

IPGP ;Ifremer, Institut Français de Recherche pour l'Exploitation de la Mer


EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2017-2018


EMSO Azores TCM3-1 Ocean Bottom Tilt Current Meter : 2018-2019


EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2017-2018


EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2018-2019


EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2019-2020


EMSO Azores TCM3-2 Ocean Bottom Tilt Current Meter : 2020-2021


EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2016-2017


EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2017-2018


EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2018-2019


EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2019-2020


EMSO Azores TCM3-3 Ocean Bottom Tilt Current Meter : 2020-2021


EMSO Azores TCM3-A Ocean Bottom Tilt Current Meter : 2020-2021


EMSO Azores TCM3-B Ocean Bottom Tilt Current Meter : 2020-2021


EMSO Azores TCM3-C Ocean Bottom Tilt Current Meter : 2020-2021


EMSO Azores TCM3-D Ocean Bottom Tilt Current Meter : 2020-2021


EMSO BB 567 SBE56

Summary:
Oceanographic mooring data from deployment of BB mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water temperature

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Degrees Celsius)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (deployment_latitude, degrees_north)
longitude (deployment_longitude, degrees_east)
depth (m)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)

CNR, National Research Council, Institute of Polar Science (CNR - ISP)


EMSO BB 584 SBE56


EMSO BB 591 SBE56


EMSO FF 700 SBE56

Summary:
Oceanographic mooring data from deployment of FF mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water temperature

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Degrees Celsius)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (latitude position of the station, degrees_north)
longitude (deployment_longitude, degrees_east)
depth (m)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)


EMSO FF 717 SBE56


EMSO Ligure Dyfamed carbon data

Summary:
Data collected from Global Telecommunications System (GTS) buoy messages

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
DC_REFERENCE (Station/Location unique identifier in data centre)
depth (m)
DEPH_QC (quality flag)
DEPH_DM (method of data processing)
WSPD (Horizontal wind speed, meter/second)
WSPD_QC (quality flag)
WSPD_DM (method of data processing)
ATMP (Atmospheric pressure at altitude, hectopascal)
ATMP_QC (quality flag)
ATMP_DM (method of data processing)
FCO2 (CO2 fugacity, microatmosphere)
FCO2_QC (quality flag)
FCO2_DM (method of data processing)
TEMP (Sea temperature, degree_Celsius)
TEMP_QC (quality flag)
TEMP_DM (method of data processing)

LOV Laboratoire Oceanographique de Villefranche


EMSO Ligure Dyfamed mooring CTD data

Summary:
Temperature, conductivity and pressure data collected from OceanSites/EMSO moorings

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (Depth of each measurement, m)
TEMP (Sea temperature, degree_Celsius)
TEMP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
DOX2 (Dissolved oxygen, micromole/kg)
DOX2_QC (quality flag)
PSAL (Practical salinity, PSU)
PSAL_QC (quality flag)
EWCT (West-east current component, meter/second)
EWCT_QC (quality flag)
HCSP (Horizontal current speed, meter/second)
HCSP_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)

Observatoire Océanologique de Villefranche-sur-Mer


EMSO Ligure Dyfamed mooring currentmeter data

Summary:
Temperature, conductivity and pressure data collected from MOOSE moorings

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (Depth of each measurement, m)
TEMP (Sea temperature, degree_Celsius)
TEMP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
HCSP (Horizontal current speed, meter/second)
HCSP_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)


EMSO Ligure Dyfamed mooring sediment traps

Summary:
Temperature, conductivity and pressure data collected from MOOSE moorings

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
depth (Depth of each measurement, m)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
TCCF (Particulate total carbon mass flux, milligram/m2/day)
TCCF_QC (quality flag)
TNNF (Particulate total nitrogen mass flux, milligram/m2/day)
TNNF_QC (quality flag)
POCF (Particulate organic carbon mass flux, milligram/m2/day)
POCF_QC (quality flag)
TSMF (Particulate total mass flux, milligram/m2/day)
TSMF_QC (quality flag)


EMSO Ligure Dyfamed oxygen data

Summary:
DYFAMED Time Series from 1994 to 2014 (43°25N - 7°52E). In the framework of the French MOOSE program, a fixed point observatory in the Ligurian Sea (so called DYFAMED) performs since 1991 physical, biogeochemical and biological observations of the water column structure. This observatory is hosted and managed by the Oceanological Observatory in Villefranche-sur-Mer (CNRS-SU)

cdm_data_type = Point
VARIABLES:
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
longitude (longitude of measurement, degrees_east)
latitude (latitude of measurement, degrees_north)
PRES (Sea water pressure, equals 0 at sea-level, decibar)
TEMP (Sea temperature in-situ ITS-90 scale, degree_Celsius)
PSAL (Practical salinity, PSU)
DOXY (Dissolved oxygen, micromole/kg)
TIME_QC (quality flag for TIME)
POSITION_QC (quality flag for LATITUDE and LONGITUDE)
PRES_QC (quality flag for PRES)
TEMP_QC (quality flag for TEMP)
PSAL_QC (quality flag for PSAL)
DOXY_QC (quality flag for DOXY)


EMSO Ligure Dyfamed oxygen/fluorescence data

Summary:
LABORATOIRE OCEANOGRAPHIQUE DE VILLEFRANCHE data from a local source.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (Depth of each measurement, m)
PRES (sea water pressure, decibar)
PRES_QC (quality flag)
PSAL (practical salinity, PSU)
PSAL_QC (quality flag)
TEMP (sea water temperature in-situ ITS-90 scale, degree_Celsius)
TEMP_QC (quality flag)
DOX1 (DISSOLVED OXYGEN, ml/l)
DOX1_QC (quality flag)
FLUO (fluorescence, relative unit)
FLUO_QC (quality flag)
DOX2
DOX2_QC (quality flag)
FLU2 (fluorescence, milligram/m3)
FLU2_QC (quality flag)
OSAT
OSAT_QC (quality flag)


EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2014-2015)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
DEPH (depth of measurements, Metres)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PRES (pressure, Decibars)
PRES_QC (Pressure quality flag)
... (22 more variables)


EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2015-2016)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
DEPH (depth of measurements, Metres)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PRES (pressure, Decibars)
PRES_QC (Pressure quality flag)
... (16 more variables)


EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2016-2017)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
DEPH (depth of measurements, Metres)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
RFVL_X (Metres per second)
RFVL_Y (Y_North, Metres per second)
LRZA (Metres per second)
XYZ_QC
... (22 more variables)


EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF 2018-2019)


EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF files 2021-07 to 2023-05)


EMSO Western Ligurian : Albatross mooring, AQUADOPP sensor (NetCDF files from 2024-03)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name, N/A)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
DEPH (depth of measurements, Metres)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
EWCT (X_East, Metres per second)
NSCT (Y_North, Metres per second)
VCSP (Metres per second)
XYX_QC (Current Velocity Quality Code)
... (22 more variables)


EMSO Western Ligurian : Albatross mooring, MICROCAT sensor (NetCDF 2014-2015)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
DEPH (depth of measurements, Metres)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
DOX2 (Dissolved oxygen, Micromoles per kilogram)
DOX_QC (Oxygen quality flag)
... (8 more variables)


EMSO Western Ligurian : Albatross mooring, MICROCAT sensor (NetCDF 2015-2016)


EMSO Western Ligurian : Albatross mooring, MICROCAT sensor (NetCDF 2016-2017)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
PRES (pressure, Decibars)
TPOT (temperature potentielle, degree_C)
CNDC (conductivity, Siemens per metre)
PSAL (Practical salinity)
DEPH (depth of measurements, Metres)
TEMP (temperature, degree_C)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
OSAT (Oxygen saturation, Percent)
DOX2 (Dissolved oxygen, Micromoles per kilogram)
DOX1 (Dissolved oxygen, Micromoles per litre)
... (10 more variables)


EMSO Western Ligurian : Albatross mooring, MICROCAT sensor (NetCDF 2018-2019)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
PRES (pressure, Decibars)
DEPH (depth of measurements, Metres)
TEMP (temperature, degree_C)
TPOT (temperature potentielle, degree_C)
CNDC (conductivity, Siemens per metre)
PSAL (Practical salinity)
DOX1 (Dissolved oxygen, Micromoles per litre)
DOX2 (Dissolved oxygen, Micromoles per kilogram)
OSAT (Oxygen saturation, Micromoles per kilogram)
... (12 more variables)


EMSO Western Ligurian : Albatross mooring, MICROCAT sensor (NetCDF 2019-2020)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
DEPH (depth of measurements, Metres)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, Siemens per metre)
CNDC_QC (Conductivity quality flag)
... (10 more variables)


EMSO Western Ligurian : Albatross mooring, MICROCAT sensor (NetCDF files 2021-07 to 2023-05)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
TPOT (temperature potentielle, degree_C)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, Siemens per metre)
CNDC_QC (Conductivity quality flag)
... (12 more variables)


EMSO Western Ligurian : Albatross mooring, MICROCAT sensor (NetCDF files from 2024-03)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name, not applicable)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
POTT (temperature potentielle, degree_C)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, Siemens per metre)
CNDC_QC (Conductivity quality flag)
... (13 more variables)


EMSO Western Ligurian : MII, AQUADOPP sensor (NetCDF files from 2017-09)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
DEPH (depth of measurements, Metres)
RFVL_X (Metres per second)
RFVL_Y (Y_North, Metres per second)
LRZA (Metres per second)
XYZ_QC
... (22 more variables)


EMSO Western Ligurian : MII, CSTAR sensor (NetCDF files from 2017-09)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
DEPH (depth of measurements, Metres)
refCount (ref Count, 1)
refCount_QC (refCount quality flag)
signalCount (signal Count, 1)
signalCount_QC (signalCount quality flag)
... (6 more variables)


EMSO Western Ligurian : MII, MICROCAT sensor (NetCDF files from 2017-09)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, Siemens per metre)
CNDC_QC (Conductivity quality flag)
PRES (pressure, Decibars)
PRES_QC (Pressure quality flag)
DEPH (depth of measurements, Metres)