EMSO Western Ligurian : MII, AQUADOPP sensor (NetCDF files from 2017-09)

The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
DEPH (depth of measurements, Metres)
RFVL_X (Metres per second)
RFVL_Y (Y_North, Metres per second)
LRZA (Metres per second)
XYZ_QC
... (22 more variables)


EMSO Western Ligurian : MII, CSTAR sensor (NetCDF files from 2017-09)

The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
DEPH (depth of measurements, Metres)
refCount (ref Count, 1)
refCount_QC (refCount quality flag)
signalCount (signal Count, 1)
signalCount_QC (signalCount quality flag)
... (6 more variables)


EMSO Western Ligurian : MII, MICROCAT sensor (NetCDF files from 2017-09)

The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, Siemens per metre)
CNDC_QC (Conductivity quality flag)
PRES (pressure, Decibars)
PRES_QC (Pressure quality flag)
DEPH (depth of measurements, Metres)


EMSO Western Ligurian : MII, OXYGEN sensor (NetCDF files from 2017-09)

The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is also part of KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation connected to KM3NeT is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS). The ALBATROSS line is an inductive line (2000 m) composed of an acoustic communication system, two inductive cables equipped with Conductivity, Temperature, Depth (CTD)-O2 sensors, current meters and two instrumented buoys. This line is deployed at a distance of 2-3 kilometers from the MII, and communication on land is done by an acoustic link with the MII, and electro-optical cable via the KM3NeT node.

cdm_data_type = TimeSeries
VARIABLES:
stationname (station name)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
DOX1 (Dissolved oxygen, Micromoles per litre)
DOX_QC (Oxygen quality flag)
OSAT (Oxygen saturation, Percent)
OSAT_QC (Oxygen Saturation quality flag)
TEMP (temperature, degree_C)
... (5 more variables)


EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2016-2017

This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between September 2016 and July 2017 using a SBE53 pressure gauges deployed on two sites.
West site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.
East site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
PRES (Sea pressure, dbar)
PRES_QC (Sea pressure quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)


EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2018-2019

This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between August 2018 and June 2019 using a SBE53 pressure gauges deployed on two sites.
West site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.
East site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
PRES (Sea pressure, dbar)
PRES_QC (Sea pressure quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)


EMSO-Azores : Seafloor pressure data from two SBE53 pressure gauges, 2019-2020

This dataset contains seafloor pressure data acquired in the framework of EMSO-Azores observatory between June 2019 and September 2020 using SBE53 pressure gauges deployed on two sites.
West site : The sensor was deployed on an existing benchmark installed with the submersible Nautile in August 2006 during the GRAVILUCK cruise (https://doi.org/10.17600/6010110). The benchmark sits on hard substratum with light hydrothermal sedimentation, on the North-West border of the Lucky Strike lava lake, next to a hydrothermal site.
East site : The sensor was deployed on an existing benchmark installed by freefall in July 2007 during the MOMARDREAM cruise (https://doi.org/10.17600/7030060). The benchmark sits in the axial valley, East of the LuckyStrike volcano in a lightly sedimented area, with apparent pillow lavas.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
PRES (Sea pressure, dbar)
PRES_QC (Sea pressure quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)


EMSO-Azores, BOREL : Meteorological unit 1 data, 2010-2011

This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in hPa) acquired in july 2011 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
WDIR (Wind from direction relative true north, deg T)
WDIR_QC (Wind from direction relative true north quality flag)
WSPD (Horizontal wind speed, m/s)
WSPD_QC (Horizontal wind speed quality flag)
ATMS (Atmospheric pressure at sea level, mBar)
ATMS_QC (Atmospheric pressure at sea level quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature in dry bulb quality flag)


EMSO-Azores, BOREL : Meteorological unit 1 data, 2011-2012

This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between July 2011 and July 2012 (n=2826) using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
WDIR (Wind from direction relative true north, deg T)
WDIR_QC (Wind from direction relative true north quality flag)
WSPD (Horizontal wind speed, m/s)
WSPD_QC (Horizontal wind speed quality flag)
ATMS (Atmospheric pressure at sea level, mBar)
ATMS_QC (Atmospheric pressure at sea level quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature in dry bulb quality flag)


EMSO-Azores, BOREL : Meteorological unit 1 data, 2012-2013

This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between July 2012 and August 2013 (n=1880) using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
WDIR (Wind from direction relative true north, deg T)
WDIR_QC (Wind from direction relative true north quality flag)
WSPD (Horizontal wind speed, m/s)
WSPD_QC (Horizontal wind speed quality flag)
ATMS (Atmospheric pressure at sea level, mBar)
ATMS_QC (Atmospheric pressure at sea level quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature in dry bulb quality flag)


EMSO-Azores, BOREL : Meteorological unit 1 data, 2013-2014

This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between August 2013 and July 2014 (n=2540) using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
WDIR (Wind from direction relative true north, deg T)
WDIR_QC (Wind from direction relative true north quality flag)
WSPD (Horizontal wind speed, m/s)
WSPD_QC (Horizontal wind speed quality flag)
ATMS (Atmospheric pressure at sea level, mBar)
ATMS_QC (Atmospheric pressure at sea level quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature in dry bulb quality flag)


EMSO-Azores, BOREL : Meteorological unit 1 data, 2014-2015

This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between July 2014 and April 2015 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
WDIR (Wind from direction relative true north, deg T)
WDIR_QC (Wind from direction relative true north quality flag)
WSPD (Horizontal wind speed, m/s)
WSPD_QC (Horizontal wind speed quality flag)
ATMS (Atmospheric pressure at sea level, mBar)
ATMS_QC (Atmospheric pressure at sea level quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature in dry bulb quality flag)


EMSO-Azores, BOREL : Meteorological unit 1 data, 2015-2016

This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between April 2015 and September 2016 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
WDIR (Wind from direction relative true north, deg T)
WDIR_QC (Wind from direction relative true north quality flag)
WSPD (Horizontal wind speed, m/s)
WSPD_QC (Horizontal wind speed quality flag)
ATMS (Atmospheric pressure at sea level, mBar)
ATMS_QC (Atmospheric pressure at sea level quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature in dry bulb quality flag)


EMSO-Azores, BOREL : Meteorological unit 1 data, 2016-2017

This dataset contains the meteorological parameters (mean wind speed, temperature in °C and atmospheric pressure in mbar) acquired between September 2016 and July 2017 using the Furuno Rowind+, mounted at the top of BOREL superstructure (data acquired every 6 hours).

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
WDIR (Wind from direction relative true north, deg T)
WDIR_QC (Wind from direction relative true north quality flag)
WSPD (Horizontal wind speed, m/s)
WSPD_QC (Horizontal wind speed quality flag)
ATMS (Atmospheric pressure at sea level, mBar)
ATMS_QC (Atmospheric pressure at sea level quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature in dry bulb quality flag)


EMSO-Azores, BOREL : Meteorological unit 2 data, 2016-2017


EMSO-Azores, EGIM : Conductivity, temperature and pressure, 2017-2018

This dataset contains conductivity, temperature and pressure data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. These are 3 of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.

The EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes…

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)
PRES (Sea pressure, dbar)
PRES_QC (Sea pressure quality flag)
CNDC (Electrical conductivity, S/m)
CNDC_QC (Electrical conductivity quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (Practical salinity quality flag)
SVEL (Sound velocity, m/s)
SVEL_QC (Sound velocity quality flag)


EMSO-Azores, EGIM : High precision pressure, 2017-2018

This dataset contains pressure data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. The pressure is one of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.

The EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)
PRES (Sea pressure, dbar)
PRES_QC (Sea pressure quality flag)


EMSO-Azores, EGIM : Temperature and dissolved oxygen concentrations, 2017-2018

This dataset contains temperature and dissolved oxygen concentrations and the associated sensor raw data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. Dissolved oxygen concentration is one of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.

The EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes…

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
OSAT (Oxygen saturation, percent)
OSAT_QC (Oxygen saturation quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)
DOXY (Dissolved oxygen, umol/l)
DOXY_QC (Dissolved oxygen quality flag)


EMSO-Azores, EGIM : Turbidity, 2017-2018

This dataset contains turbidity and the associated sensor raw data acquired between July 2017 and August 2018 on EMSO-Azores observatory by the EGIM. Tubidity is one of the 7 core parameters monitored by the EGIM, EMSO Generic Instrumental Module.
The EGIM prototype was deployed at Lucky Strike hydrothermal vent site, 25 m south west of the active edifice Tour Eiffel, to monitor local hydrodynamic variability and complement the data obtained by the numerous sensors set on this site: oceanographic mooring deployed south of the vent field, the multidisciplinary Seamon East node, autonomous current meters, array of temperature probes…

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TUR4 (Turbidity, NTU)
TUR4_QC (Turbidity quality flag)


EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2011-2012

This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2011 and March 2012 (n=1780) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, without in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
IRON (Total iron, umol/l)
IRON_QC (Total iron quality flag)


EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2013-2014

This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between September 2013 and February 2014 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
IRON (Total iron, umol/l)
IRON_QC (Total iron quality flag)


EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2014-2015

This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2014 and August 2014 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF1) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)
IRON (Total iron, umol/l)
IRON_QC (Total iron quality flag)


EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2016-2017

This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between September 2016 and February 2017 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF1) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)
IRON (Total iron, umol/l)
IRON_QC (Total iron quality flag)


EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2017-2018

This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2017 and March 2018 (n=168) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)
IRON (Total iron, umol/l)
IRON_QC (Total iron quality flag)


EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2018-2019

This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between August 2018 and December 2018 (n=445) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)
IRON (Total iron, umol/l)
IRON_QC (Total iron quality flag)


EMSO-Azores, SeaMoN East : CHEMINI total dissolved iron concentrations, 2019-2020

This dataset contains dissolved iron concentrations (Fe(II) + Fe(III), µmol/l) acquired between July 2019 and Septembre 2020 (n=1620) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with weekly in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth). CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
IRON (Total iron, umol/l)
IRON_QC (Total iron quality flag)


EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2013-2014

This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between August 2013 and July 2014 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)
OSAT (Oxygen saturation, percent)
OSAT_QC (Oxygen saturation quality flag)
DOXY (Dissolved oxygen, umol/l)
DOXY_QC (Dissolved oxygen quality flag)


EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2015-2016

This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between April 2015 and September 2016 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)
OSAT (Oxygen saturation, percent)
OSAT_QC (Oxygen saturation quality flag)
DOXY (Dissolved oxygen, umol/l)
DOXY_QC (Dissolved oxygen quality flag)


EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations (µmol/l) data, 2016-2017 (Tempo)

This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) (and the associated sensor raw data) acquired between September 2016 and February 2017 using an Aanderaa optode (model 4330, sensor head #2133, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)
OSAT (Oxygen saturation, percent)
OSAT_QC (Oxygen saturation quality flag)
DOXY (Dissolved oxygen, umol/l)
DOXY_QC (Dissolved oxygen quality flag)


EMSO-Azores, SeaMoN East : Temperature (°C) and dissolved oxygen concentrations, 2012-2013

This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between July 2012 and August 2013 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure). The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (Sea temperature quality flag)
OSAT (Oxygen saturation, percent)
OSAT_QC (Oxygen saturation quality flag)
DOXY (Dissolved oxygen, umol/l)
DOXY_QC (Dissolved oxygen quality flag)


EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2011-2012

This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2011 and July 2012 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TUR4 (Turbidity, NTU)
TUR4_QC (Turbidity quality flag)


EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2012-2013

This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2012 and August 2013 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TUR4 (Turbidity, NTU)
TUR4_QC (Turbidity quality flag)


EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2013-2014

This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between August 2013 and July 2014 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TUR4 (Turbidity, NTU)
TUR4_QC (Turbidity quality flag)


EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2015-2016

This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between April 2015 and September 2016 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TUR4 (Turbidity, NTU)
TUR4_QC (Turbidity quality flag)


EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2016-2017

This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between September 2016 and February 2017 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TUR4 (Turbidity, NTU)
TUR4_QC (Turbidity quality flag)


EMSO-Azores, SeaMoN East : Turbidity (NTU) data, 2017-2018

This dataset contains turbidity (Nephelometric Turbidity Units (NTU)) data acquired between July 2017 and July 2018 using a Wetlabs turbidimeter (ECO-BBRTD, serial # 215R) installed horizontally at 1.5 m height at the top of the SeaMoN East frame. The sensor was not calibrated as the sizes of the natural particles are unknown. Data was acquired every 15 minutes. The instrument is part of the SeaMoN East ecological monitoring node deployed at ca 10m away from the active hydrothermal edifice Tour Eiffel.

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (m)
DEPH_QC (Depth quality flag)
TUR4 (Turbidity, NTU)
TUR4_QC (Turbidity quality flag)


EMSO-LIGURE NICE, Pore pressure and temperature data from piezometer SPF-PZ3L-01, 2015-2019

This dataset contains the pressure and temperature data acquired by piezometer SPF-PZ3L from October 2015 following its deployment during the ESS_PENF50_2015 cruise. It operated in an autonomous mode until its connection to the EMSO-Ligure Nice cabled observatory on the 14/09/2016. Sediment pore pressure together with temperature have been measured at 20 different levels below seafloor.

cdm_data_type = TimeSeries
VARIABLES:
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (Depth below sea floor, m)
SE_DEPH_QC (quality flag quality flag)
TIME_QC (quality flag quality flag)
SE_TEMP (Solid earth temperature, degree_C)
SE_PRES (Solid earth differential pore pressure, dbar)
SE_TEMP_QC (quality flag quality flag)
SE_PRES_QC (quality flag quality flag)
LEVEL (1)


EMSO-LIGURE NICE, Pore pressure and temperature data from piezometer ST4-PZ2L-01B, 2014-2019

This dataset contains the pressure and temperature data acquired below seafloor by piezometer ST4-PZ2L-01B since 2016 following its deployment during the STEP 2014 cruise. It operated in an autonomous mode until its connection to the EMSO-Ligure Nice cabled observatory on the 14/09/2016. Sediment pore pressure together with temperature have been measured at 6 different levels below seafloor.

cdm_data_type = TimeSeries
VARIABLES:
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (Depth below sea floor, m)
SE_DEPH_QC (quality flag quality flag)
TIME_QC (quality flag quality flag)
SE_TEMP (Solid earth temperature, degree_C)
SE_PRES (Solid earth differential pore pressure, dbar)
SE_TEMP_QC (quality flag quality flag)
SE_PRES_QC (quality flag quality flag)
LEVEL (1)


EMSO-LIGURE NICE, Pore pressure and temperature data from piezometer ST4-PZ2L-03, 2014-2018

This dataset contains the pressure and temperature data acquired below seafloor by piezometer ST4-PZ2L-03 since January 2014 following its deployment during the STEP 2014 cruise. It operated in an autonomous mode until its connection to the EMSO-Ligure Nice cabled observatory on the 13/09/2017. Sediment pore pressure together with temperature have been measured at 7 different levels below seafloor.

cdm_data_type = TimeSeries
VARIABLES:
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (Depth below sea floor, m)
SE_DEPH_QC (quality flag quality flag)
TIME_QC (quality flag quality flag)
SE_TEMP (Solid earth temperature, degree_C)
SE_PRES (Solid earth differential pore pressure, dbar)
SE_TEMP_QC (quality flag quality flag)
SE_PRES_QC (quality flag quality flag)
LEVEL (1)


EMSO-LIGURE NICE, Pressure and temperature data from piezometer MAR2-PZML-01 from July 2021 to September 2024

This dataset contains the pressure and temperature data acquired by piezometer MAR2-PZML-01 from July 2021 following its deployment during the MaRoLiS cruise until its recovery in September 2024 during the STEP2024 cruise. It was connected to the EMSO-Ligure Nice cabled observatory. Pressure has been measured together with temperature at seven different levels below seafloor. The P1 and P7 absolute pressure sensors have recorded the ambient pressure of the water column through the seawater-filled interior of the piezometer shaft. The P2 to P6 differential pressure sensors have recorded fluid pressure in the sediment pores relative to the water column pressure.

cdm_data_type = TimeSeries
VARIABLES:
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (Depth below sea floor, m)
SE_DEPH_QC (quality flag quality flag)
TIME_QC (quality flag quality flag)
SE_TEMP (Solid earth temperature, degree_C)
SE_PRES (Solid earth differential pore pressure, dbar)
SE_TEMP_QC (quality flag quality flag)
SE_PRES_QC (quality flag quality flag)
LEVEL (1)


EMSO-LO Western Ligurian : BJS_Bathydock Optode sensors (NetCDF files from 2023-09-20)

The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories.  It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems.  This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea.  There are currently eleven deep water nodes plus four shallow water test nodes.  EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow.  This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, not applicable)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
DOX1 (oxygen concentration, Micromoles per litre)
... (10 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock, ADCP sensor (NetCDF files from 2023-09-20

The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories.  It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems.  This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea.  There are currently eleven deep water nodes plus four shallow water test nodes.  EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow.  This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
HEAD (Heading, degrees)
Head_QC (Heading quality code)
PITCH (degrees)
Pitch_QC (Pitch quality code)
... (26 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock_Bathybot Aquadopp sensor (NetCDF files from 2023-09-20)

EMSO-LO Western Ligurian : BathyBot, Aquadopp sensor (Network Common Data Format (NetCDF) files from 2023-04-28). The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, Not applicable)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
Position_QC (quality flag for position)
DEPH (depth of measurements, Metres)
Deph_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
Time_QC (Time quality flag)
EWCT (X_East eastward_sea_water_velocity, Metres per second)
NSCT (Y_North northward_sea_water_velocity, Metres per second)
... (26 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock_Bathybot Microcat sensor (NetCDF files from 2023-09-20)

The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, N/A)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, Siemens per metre)
... (5 more variables)


Oceanographic mooring data from deployment of BB mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water temperature, currents along the water column

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Metres per second)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (deployment_latitude, degrees_north)
longitude (deployment_longitude, degrees_east)
depth (Depth of each measurement, m)
UVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
VVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
WVEL_ADCP (Vertical velocity of the water column (currents), Metres per second)
CurrVel_QC (Quality Control Flag of Current Velocity in the water column)
ECI_B1 (Acoustic backscatter in the water column, Counts)
ECI_B2 (Acoustic backscatter in the water column, Counts)
ECI_B3 (Acoustic backscatter in the water column, Counts)
ECI_B4 (Acoustic backscatter in the water column, Counts)
ECHO_QC (Quality Control Flag of Echo Intensity Signal in the water column)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)

CNR, National Research Council, Institute of Polar Science (CNR - ISP)


Oceanographic mooring data from deployment of BB mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water pressure, temperature, potential_temperature, practical salinity, density, turbidity and dissolved oxygen in sea-water

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Degrees Celsius)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
depth (Depth of each measurement, m)
AHGT (sea water pressure, dbar)
sea_water_pressure_QC (quality control flag of sea_water_pressure)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)
Temperature (Potential Temperature of the sea-water, Degrees Celsius)
PTEMP_QC (quality control flag of sea-water_potential_temperature)
PSAL (Salinity of the sea-water, Dimensionless)
PSAL_QC (quality control flag of pratical salinity of sea water)
SIGT (sea_water_density, Kilograms per cubic metre)
SIGT_QC (quality control flag of sea_water_density)
DOXY (Dissolved oxygen in the water column, Millilitres per litre)
DOXY_QC (quality control flag of Dissolved oxygen in the water column)
TSED (sea_water_turbidity, NTU)
TURB_QC (quality control flag of Turbidity of water)


Oceanographic mooring data from deployment of FF mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water temperature, currents along the water column

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Metres per second)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
depth (Depth of each measurement, m)
UVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
VVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
WVEL_ADCP (Vertical velocity of the water column (currents), Metres per second)
CurrVel_QC (Quality Control Flag of Current Velocity in the water column)
ECI_B1 (Acoustic backscatter in the water column, Counts)
ECI_B2 (Acoustic backscatter in the water column, Counts)
ECI_B3 (Acoustic backscatter in the water column, Counts)
ECI_B4 (Acoustic backscatter in the water column, Counts)
ECHO_QC (Quality Control Flag of Echo Intensity Signal in the water column)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)


Oceanographic mooring data from deployment of FF mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water pressure, temperature, potential_temperature, practical salinity, density, turbidity and dissolved oxygen in sea-water

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Degrees Celsius)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
depth (Depth of each measurement, m)
AHGT (sea water pressure, dbar)
sea_water_pressure_QC (quality control flag of sea_water_pressure)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)
Temperature (Potential Temperature of the sea-water, Degrees Celsius)
PTEMP_QC (quality control flag of sea-water_potential_temperature)
PSAL (Salinity of the sea-water, Dimensionless)
PSAL_QC (quality control flag of pratical salinity of sea water)
SIGT (sea_water_density, Kilograms per cubic metre)
SIGT_QC (quality control flag of sea_water_density)
DOXY (Dissolved oxygen in the water column, Millilitres per litre)
DOXY_QC (quality control flag of Dissolved oxygen in the water column)
TSED (sea_water_turbidity, NTU)
TURB_QC (quality control flag of Turbidity of water)


Data acquired by EUXRoOB01 (Black Sea offshore buoy) in 2024

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CPWC (EUXRoOB01 Chlorophyll Concentration, Micrograms per litre)
DOXY (EUXRoOB01 Oxygen Concentration, Micromoles per litre)
TSED (EUXRoOB01 Water Turbidity, Nephelometric Turbidity Units)
CNDC (EUXRoOB01 Water Conductivity, MilliSiemens per centimetre)
CSPD (EUXRoOB01 Water Current Speed, Metres per second)
CDIR (EUXRoOB01 Water Current Direction, Degrees)
TEMP (EUXRoOB01 Water Temperature, Degrees Celsius)
PRES (EUXRoOB01 Water Pressure, Decibars)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)

National Institute of Marine Geology and Geoecology


Data acquired by EUXRoOB02 (Black Sea offshore buoy) in 2024

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CPWC (EUXRoOB02 Chlorophyll Concentration, Micrograms per litre)
DOXY (EUXRoOB02 Oxygen Concentration, Micromoles per litre)
TSED (EUXRoOB02 Water Turbidity, Nephelometric Turbidity Units)
CNDC (EUXRoOB02 Water Conductivity, MilliSiemens per centimetre)
CSPD (EUXRoOB02 Water Current Speed, Metres per second)
CDIR (EUXRoOB02 Water Current Direction, Degrees)
TEMP (EUXRoOB02 Water Temperature, Degrees Celsius)
PRES (EUXRoOB02 Water Pressure, Decibars)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Data acquired by EUXRoOB03 (Black Sea offshore buoy) in 2024

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CPWC (EUXRoOB03 Chlorophyll Concentration, Micrograms per litre)
DOXY (EUXRoOB03 Oxygen Concentration, Micromoles per litre)
TSED (EUXRoOB03 Water Turbidity, Nephelometric Turbidity Units)
CNDC (EUXRoOB03 Water Conductivity, MilliSiemens per centimetre)
CSPD (EUXRoOB03 Water Current Speed, Metres per second)
CDIR (EUXRoOB03 Water Current Direction, Degrees)
TEMP (EUXRoOB03 Water Temperature, Degrees Celsius)
PRES (EUXRoOB03 Water Pressure, Decibars)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Fluorometry data from a Turner Designs C3 sensor at OBSEA's Besos Buoy (30min average)

Data collected by a Turner Designs C3-SN2300642 fluorometer mounted at the Besos Buoy, on top of the OBSEA observatory, 30min average

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CDOM (The quantity of coloured organic compounds in solution in unit volume of any body of water, Parts per billion)
COIL (crude oil in sea water, Parts per billion)
RFUL (refined fuels in sea water, Parts per million)
TEMP (in situ sea water temperature, Degrees Celsius)
CDOM_QC (The quantity of coloured organic compounds in solution in unit volume of any body of water quality control flags)
COIL_QC (crude oil in sea water quality control flags)
RFUL_QC (refined fuels in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Fluorometry data from a Turner Designs C3 sensor at OBSEA's Besos Buoy (full data)

Data collected by a Turner Designs C3-SN2300642 fluorometer mounted at the Besos Buoy, on top of the OBSEA observatory, full data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CDOM (The quantity of coloured organic compounds in solution in unit volume of any body of water, Parts per billion)
COIL (crude oil in sea water, Parts per billion)
RFUL (refined fuels in sea water, Parts per million)
TEMP (in situ sea water temperature, Degrees Celsius)
CDOM_QC (The quantity of coloured organic compounds in solution in unit volume of any body of water quality control flags)
COIL_QC (crude oil in sea water quality control flags)
RFUL_QC (refined fuels in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Med Sea, Cretan Sea, NRT in situ Observations

Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PHPH (Ph, 1)
PHPH_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PHPH (Ph, 1)
PHPH_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PHPH (Ph, 1)
PHPH_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
... (24 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR
GDIR_QC
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea, Hellenic Arc, NRT in situ Observations

Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0 (Spectral significant wave height (Hm0), m)
VHM0_QC (quality flag)
VMDR (Mean wave direction from (Mdir), degree)
VMDR_QC (quality flag)
VTM02 (Spectral moments (0,2) wave period (Tm02), s)
VTM02_QC (quality flag)
... (14 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DRYT (degree_C)
DRYT_QC
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0
VHM0_QC
VMDR
VMDR_QC
VTM02
VTM02_QC
... (14 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DRYT (degree_C)
DRYT_QC
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0
VHM0_QC
VMDR
VMDR_QC
VTM02
VTM02_QC
... (12 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0 (Spectral significant wave height (Hm0), m)
VHM0_QC (quality flag)
VMDR (Mean wave direction from (Mdir), degree)
VMDR_QC (quality flag)
VTM02 (Spectral moments (0,2) wave period (Tm02), s)
VTM02_QC (quality flag)
VTPK (Wave period at spectral peak / peak period (Tp), s)
VTPK_QC (quality flag)
... (12 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DRYT (degree_C)
DRYT_QC
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0
VHM0_QC
VMDR
VMDR_QC
VTM02
VTM02_QC
... (14 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR
GDIR_QC
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1
DOX1_QC
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


NEMO-SN1 Observatory CTD data (2002-2003)

The dataset contains sea bottom Conductivity, Temperature and Pressure data (about 1 m above the bottom) acquired through a SBE 37-SM installed on SN-1 station. The collection period ranges from October 2002 through February 2003.

cdm_data_type = TimeSeries
VARIABLES:
depth (depth of measurements, m)
longitude (longitude of measurements, degrees_east)
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TEMP (temperature, degree_C)
CNDC (conductivity, MilliSiemens per centimetre)
PRES (pressure, Decibar)
DEPTH_QC (Depth quality flag)
CNDC_QC (Conductivity quality flag)
POSITION_QC (Position quality flag)
TEMP_QC (Temperature quality flag)
TIME_QC (Time quality flag)
PRES_QC (Pressure quality flag)

Istituto Nazionale Geofisica e Vulcanologia - Sez. Roma2


NEMO-SN1 Observatory CTD data (2012-2013)

The dataset contains sea bottom Conductivity, Temperature and Pressure data (about 1 m above the bottom) acquired through a SBE 37-SM installed on SN-1 station.

cdm_data_type = TimeSeries
VARIABLES:
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
longitude (longitude of measurements, degrees_east)
TEMP (temperature, degree_C)
CNDC (conductivity, MilliSiemens per centimetre)
PRES (pressure, Decibar)
CNDC_QC (Conductivity quality flag)
PRES_QC (Pressure quality flag)
POSITION_QC (Position quality flag)
TEMP_QC (Temperature quality flag)
TIME_QC (Time quality flag)
DEPTH_QC (Depth quality flag)


NEMO-SN1 Observatory Observatory Pressure Gauge data

This sensor measures the hydrostatic (water column) pressure exerted on the sensor resulting from the pressure of water above its position and the atmospheric air pressure acting on the sea surface.

cdm_data_type = TimeSeries
VARIABLES:
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
PRES (pressure, decibar)
TIME_QC (Time quality flag)
POSITION_QC (Position quality flag)
DEPTH_QC (Depth quality flag)
PRES_QC (Pressure quality flag)


Physicochemical data from an SA8065 multiparameter probe at OBSEA's Besos Buoy (30min average)

Physicochemical data collected by an SA8065-SN0000 multiparameter probe at the Besos Buoy, on top of the OBSEA observatory, 30min average

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
TEMP (in situ sea water temperature, Degrees Celsius)
CNDC (sea water electrical conductivity, Siemens per metre)
DOXY (saturation of oxygen in sea water, Percent)
ALKY (Minus the log of the hydrogen ion concentration (moles per litre) in the water column., pH units)
WBRX (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species, Millivolts)
TURB (Turbidity of water in the water body, Nephelometric Turbidity Units)
depth_QC (depth of measurements quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
DOXY_QC (saturation of oxygen in sea water quality control flags)
ALKY_QC (Minus the log of the hydrogen ion concentration (moles per litre) in the water column. quality control flags)
WBRX_QC (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species quality control flags)
TURB_QC (Turbidity of water in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


Physicochemical data from an SA8065 multiparameter probe at OBSEA's Besos Buoy (full data)

Physicochemical data collected by an SA8065-SN0000 multiparameter probe at the Besos Buoy, on top of the OBSEA observatory, full sensor data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
TEMP (in situ sea water temperature, Degrees Celsius)
CNDC (sea water electrical conductivity, Siemens per metre)
DOXY (saturation of oxygen in sea water, Percent)
ALKY (Minus the log of the hydrogen ion concentration (moles per litre) in the water column., pH units)
WBRX (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species, Millivolts)
TURB (Turbidity of water in the water body, Nephelometric Turbidity Units)
depth_QC (depth of measurements quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
DOXY_QC (saturation of oxygen in sea water quality control flags)
ALKY_QC (Minus the log of the hydrogen ion concentration (moles per litre) in the water column. quality control flags)
WBRX_QC (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species quality control flags)
TURB_QC (Turbidity of water in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


Sediment-Trap, OS ESTOC 1992 D SEDIMENT TRAP CI 1 1050m (OceanSITES ESTOC in-situ data.)

OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time]):
TIME_BOUNDS (days)
TSMF (Particulate total mass flux, milligrams per square meter per day)
CO3F (Particulate total calcium carbonate flux, milligrams per square metre per day)
POCF (Particulate total organic carbon flux, milligrams per square metre per day)
TNNF (Particulate total nitrogen mass flux, milligrams per square metre per day)
LTHF (lithogenic fraction flux, milligrams per square metre per day)
SIOF (Mass of elemental silicon in biogenic silica (opal), milligrams per square metre per day)
DEPTH_SENSOR (depth of measurement, meters)

Department of Geosciences and MARUM, UniversitÃ¤t Bremen


Sediment-Trap, OS ESTOC 1992 D SEDIMENT TRAP CI 1 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1993 D SEDIMENT TRAP CI 2 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1993 D SEDIMENT TRAP CI 2 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1993 D SEDIMENT TRAP CI 3 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1993 D SEDIMENT TRAP CI 3 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1993 D SEDIMENT TRAP CI 3 750m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1994 D SEDIMENT TRAP CI 4 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1994 D SEDIMENT TRAP CI 4 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1994 D SEDIMENT TRAP CI 4 750m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1995 D SEDIMENT TRAP CI 5 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1997 D SEDIMENT TRAP CI 7 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1998 D SEDIMENT TRAP CI 8 1050m (OceanSITES ESTOC in-situ data.), 1997


Sediment-Trap, OS ESTOC 1998 D SEDIMENT TRAP CI 8 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1998 D SEDIMENT TRAP CI 8 750m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1998 D SEDIMENT TRAP CI 9 3060m (OceanSITES ESTOC in-situ data.)

OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time]):
TIME_BOUNDS (days)
TSMF (Particulate total mass flux, milligrams per square meter per day)
CO3F (Particulate total calcium carbonate flux, milligrams per square metre per day)
POCF (Particulate total organic carbon flux, milligrams per square metre per day)
TNNF (Particulate total nitrogen mass flux, milligrams per square metre per day)
LTHF (lithogenic fraction flux, milligrams per square metre per day)
SIOF (Mass of elemental silicon in biogenic silica (opal), milligrams per square metre per day)
DEPTH_SENSOR (depth of measurement, meters)

Department of Geosciences and MARUM, UniversitÃ¤t Bremen


Sediment-Trap, OS ESTOC 1999 D SEDIMENT TRAP CI 10 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1999 D SEDIMENT TRAP CI 10 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1999 D SEDIMENT TRAP CI 10 750m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1999 D SEDIMENT TRAP CI 11 750m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1999 D SEDIMENT TRAP CI 12 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1999 D SEDIMENT TRAP CI 12 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 1999 D SEDIMENT TRAP CI 12 750m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2000 D SEDIMENT TRAP CI 13 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2000 D SEDIMENT TRAP CI 13 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2000 D SEDIMENT TRAP CI 13 750m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2001 D SEDIMENT TRAP CI 14 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2001 D SEDIMENT TRAP CI 14 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2003 D SEDIMENT TRAP CI 16 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2003 D SEDIMENT TRAP CI 16 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2003 D SEDIMENT TRAP MSD1 3630m (OceanSITES ESTOC in-situ data.)

OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time]):
TIME_BOUNDS (days)
TSMF (Particulate total mass flux, milligrams per square meter per day)
SIOF (Mass of elemental silicon in biogenic silica (opal), milligrams per square metre per day)
DEPTH_SENSOR (depth of measurement, meters)

Department of Geosciences and MARUM, UniversitÃ¤t Bremen


Sediment-Trap, OS ESTOC 2004 D SEDIMENT TRAP CI 17 1050m (OceanSITES ESTOC in-situ data.)

OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time]):
TIME_BOUNDS (days)
TSMF (Particulate total mass flux, milligrams per square meter per day)
CO3F (Particulate total calcium carbonate flux, milligrams per square metre per day)
POCF (Particulate total organic carbon flux, milligrams per square metre per day)
TNNF (Particulate total nitrogen mass flux, milligrams per square metre per day)
LTHF (lithogenic fraction flux, milligrams per square metre per day)
SIOF (Mass of elemental silicon in biogenic silica (opal), milligrams per square metre per day)
DEPTH_SENSOR (depth of measurement, meters)


Sediment-Trap, OS ESTOC 2004 D SEDIMENT TRAP CI 17 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2004 D SEDIMENT TRAP CI 17 750m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2004 D SEDIMENT TRAP MSD2 3630m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2004 D SEDIMENT TRAP MSD3 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2005 D SEDIMENT TRAP CI 18 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2005 D SEDIMENT TRAP CI 18 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2005 D SEDIMENT TRAP CI 18 750m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2005 D SEDIMENT TRAP MSD4 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2005 D SEDIMENT TRAP MSD5 750m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2006 D SEDIMENT TRAP CI 19 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2006 D SEDIMENT TRAP CI 19 3060m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2006 D SEDIMENT TRAP CI 19 750m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2007 D SEDIMENT TRAP CI 20 1050m (OceanSITES ESTOC in-situ data.)


Sediment-Trap, OS ESTOC 2007 D SEDIMENT TRAP CI 20 750m (OceanSITES ESTOC in-situ data.)

Department of Geosciences and MARUM, UniversitÃ¤t Bremen


Sediment-Trap, OS ESTOC 2008 D SEDIMENT TRAP CI 21 750m (OceanSITES ESTOC in-situ data.)

OceanSITES ESTOC in-situ data. The European Station forTime-series in the Ocean, Canary Islands (ESTOC) is a sustained and multidisciplinary observatory located at the east central North Atlantic. The ESTOC goal is the creation of an Eulerian long time series on an inter- and multidisciplinary basis in order to monitor and help understand oceanic long-term variability in the North Atlantic subtropical gyre. ESTOC is providing hydrographic and biogeochemical time-series datasets from 1994. Activities include a ship-based observation program (observations of physical, chemical and biological parameters) and one moored structure with meteorological and oceanic surface observations, as well as in the water column.

cdm_data_type = TimeSeries
VARIABLES (all of which use the dimensions [time]):
TIME_BOUNDS (days)
TSMF (Particulate total mass flux, milligrams per square meter per day)
CO3F (Particulate total calcium carbonate flux, milligrams per square metre per day)
POCF (Particulate total organic carbon flux, milligrams per square metre per day)
TNNF (Particulate total nitrogen mass flux, milligrams per square metre per day)
LTHF (lithogenic fraction flux, milligrams per square metre per day)
SIOF (Mass of elemental silicon in biogenic silica (opal), milligrams per square metre per day)
DEPTH_SENSOR (depth of measurement, meters)


Sediment-Trap, OS ESTOC 2009 D SEDIMENT TRAP CI 22 1050m (OceanSITES ESTOC in-situ data.), 2008


Sediment-Trap, OS ESTOC 2009 D SEDIMENT TRAP CI 22 750m (OceanSITES ESTOC in-situ data.), 2008