EMSO-LIGURE NICE, Pore pressure and temperature data from piezometer ST4-PZ2L-01B, 2014-2019

Summary:
This dataset contains the pressure and temperature data acquired below seafloor by piezometer ST4-PZ2L-01B since 2016 following its deployment during the STEP 2014 cruise. It operated in an autonomous mode until its connection to the EMSO-Ligure Nice cabled observatory on the 14/09/2016. Sediment pore pressure together with temperature have been measured at 6 different levels below seafloor.

cdm_data_type = TimeSeries
VARIABLES:
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (Depth below sea floor, m)
SE_DEPH_QC (quality flag quality flag)
TIME_QC (quality flag quality flag)
SE_TEMP (Solid earth temperature, degree_C)
SE_PRES (Solid earth differential pore pressure, dbar)
SE_TEMP_QC (quality flag quality flag)
SE_PRES_QC (quality flag quality flag)
LEVEL (1)


EMSO-LIGURE NICE, Pore pressure and temperature data from piezometer ST4-PZ2L-03, 2014-2018

Summary:
This dataset contains the pressure and temperature data acquired below seafloor by piezometer ST4-PZ2L-03 since January 2014 following its deployment during the STEP 2014 cruise. It operated in an autonomous mode until its connection to the EMSO-Ligure Nice cabled observatory on the 13/09/2017. Sediment pore pressure together with temperature have been measured at 7 different levels below seafloor.

cdm_data_type = TimeSeries
VARIABLES:
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (Depth below sea floor, m)
SE_DEPH_QC (quality flag quality flag)
TIME_QC (quality flag quality flag)
SE_TEMP (Solid earth temperature, degree_C)
SE_PRES (Solid earth differential pore pressure, dbar)
SE_TEMP_QC (quality flag quality flag)
SE_PRES_QC (quality flag quality flag)
LEVEL (1)


EMSO-LIGURE NICE, Pressure and temperature data from piezometer MAR2-PZML-01 from July 2021 to September 2024

Summary:
This dataset contains the pressure and temperature data acquired by piezometer MAR2-PZML-01 from July 2021 following its deployment during the MaRoLiS cruise until its recovery in September 2024 during the STEP2024 cruise. It was connected to the EMSO-Ligure Nice cabled observatory. Pressure has been measured together with temperature at seven different levels below seafloor. The P1 and P7 absolute pressure sensors have recorded the ambient pressure of the water column through the seawater-filled interior of the piezometer shaft. The P2 to P6 differential pressure sensors have recorded fluid pressure in the sediment pores relative to the water column pressure.

cdm_data_type = TimeSeries
VARIABLES:
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (Depth below sea floor, m)
SE_DEPH_QC (quality flag quality flag)
TIME_QC (quality flag quality flag)
SE_TEMP (Solid earth temperature, degree_C)
SE_PRES (Solid earth differential pore pressure, dbar)
SE_TEMP_QC (quality flag quality flag)
SE_PRES_QC (quality flag quality flag)
LEVEL (1)


EMSO-LO Western Ligurian : BJS_Bathydock Optode sensors (NetCDF files from 2023-09-20)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories.  It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems.  This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea.  There are currently eleven deep water nodes plus four shallow water test nodes.  EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow.  This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, not applicable)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
DOX1 (oxygen concentration, Micromoles per litre)
... (10 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock, ADCP sensor (NetCDF files from 2023-09-20

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories.  It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems.  This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea.  There are currently eleven deep water nodes plus four shallow water test nodes.  EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow.  This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
HEAD (Heading, degrees)
Head_QC (Heading quality code)
PITCH (degrees)
Pitch_QC (Pitch quality code)
... (26 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock_Bathybot Aquadopp sensor (NetCDF files from 2023-09-20)

Summary:
EMSO-LO Western Ligurian : BathyBot, Aquadopp sensor (Network Common Data Format (NetCDF) files from 2023-04-28). The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, Not applicable)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
Position_QC (quality flag for position)
DEPH (depth of measurements, Metres)
Deph_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
Time_QC (Time quality flag)
EWCT (X_East eastward_sea_water_velocity, Metres per second)
NSCT (Y_North northward_sea_water_velocity, Metres per second)
... (26 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock_Bathybot Microcat sensor (NetCDF files from 2023-09-20)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, N/A)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, Siemens per metre)
... (5 more variables)


EMSO-SA BB 505 ADCP

Summary:
Oceanographic mooring data from deployment of BB mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water temperature, currents along the water column

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Metres per second)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
depth (Depth of each measurement, m)
UVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
VVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
WVEL_ADCP (Vertical velocity of the water column (currents), Metres per second)
CurrVel_QC (Quality Control Flag of Current Velocity in the water column)
ECI_B1 (Acoustic backscatter in the water column, Counts)
ECI_B2 (Acoustic backscatter in the water column, Counts)
ECI_B3 (Acoustic backscatter in the water column, Counts)
ECI_B4 (Acoustic backscatter in the water column, Counts)
ECHO_QC (Quality Control Flag of Echo Intensity Signal in the water column)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)

CNR, National Research Council, Institute of Polar Science (CNR - ISP)


EMSO-SA BB 595 CTD

Summary:
Oceanographic mooring data from deployment of BB mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water pressure, temperature, potential_temperature, practical salinity, density, turbidity and dissolved oxygen in sea-water

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Degrees Celsius)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
depth (Depth of each measurement, m)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
AHGT (sea water pressure, dbar)
sea_water_pressure_QC (quality control flag of sea_water_pressure)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)
Temperature (Potential Temperature of the sea-water, Degrees Celsius)
PTEMP_QC (quality control flag of sea-water_potential_temperature)
PSAL (Salinity of the sea-water, Dimensionless)
PSAL_QC (quality control flag of pratical salinity of sea water)
SIGT (sea_water_density, Kilograms per cubic metre)
SIGT_QC (quality control flag of sea_water_density)
DOXY (Dissolved oxygen in the water column, Millilitres per litre)
DOXY_QC (quality control flag of Dissolved oxygen in the water column)
TSED (sea_water_turbidity, NTU)
TURB_QC (quality control flag of Turbidity of water)


EMSO-SA FF 644 ADCP

Summary:
Oceanographic mooring data from deployment of FF mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water temperature, currents along the water column

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Metres per second)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
depth (Depth of each measurement, m)
UVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
VVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
WVEL_ADCP (Vertical velocity of the water column (currents), Metres per second)
CurrVel_QC (Quality Control Flag of Current Velocity in the water column)
ECI_B1 (Acoustic backscatter in the water column, Counts)
ECI_B2 (Acoustic backscatter in the water column, Counts)
ECI_B3 (Acoustic backscatter in the water column, Counts)
ECI_B4 (Acoustic backscatter in the water column, Counts)
ECHO_QC (Quality Control Flag of Echo Intensity Signal in the water column)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)


EMSO-SA FF 734 CTD

Summary:
Oceanographic mooring data from deployment of FF mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water pressure, temperature, potential_temperature, practical salinity, density, turbidity and dissolved oxygen in sea-water

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Degrees Celsius)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
depth (Depth of each measurement, m)
AHGT (sea water pressure, dbar)
sea_water_pressure_QC (quality control flag of sea_water_pressure)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)
Temperature (Potential Temperature of the sea-water, Degrees Celsius)
PTEMP_QC (quality control flag of sea-water_potential_temperature)
PSAL (Salinity of the sea-water, Dimensionless)
PSAL_QC (quality control flag of pratical salinity of sea water)
SIGT (sea_water_density, Kilograms per cubic metre)
SIGT_QC (quality control flag of sea_water_density)
DOXY (Dissolved oxygen in the water column, Millilitres per litre)
DOXY_QC (quality control flag of Dissolved oxygen in the water column)
TSED (sea_water_turbidity, NTU)
TURB_QC (quality control flag of Turbidity of water)


EUXRoOB01 DATA - 2024

Summary:
Data acquired by EUXRoOB01 (Black Sea offshore buoy) in 2024

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CPWC (EUXRoOB01 Chlorophyll Concentration, Micrograms per litre)
DOXY (EUXRoOB01 Oxygen Concentration, Micromoles per litre)
TSED (EUXRoOB01 Water Turbidity, Nephelometric Turbidity Units)
CNDC (EUXRoOB01 Water Conductivity, MilliSiemens per centimetre)
CSPD (EUXRoOB01 Water Current Speed, Metres per second)
CDIR (EUXRoOB01 Water Current Direction, Degrees)
TEMP (EUXRoOB01 Water Temperature, Degrees Celsius)
PRES (EUXRoOB01 Water Pressure, Decibars)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)

National Institute of Marine Geology and Geoecology


EUXRoOB02 DATA - 2024

Summary:
Data acquired by EUXRoOB02 (Black Sea offshore buoy) in 2024

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CPWC (EUXRoOB02 Chlorophyll Concentration, Micrograms per litre)
DOXY (EUXRoOB02 Oxygen Concentration, Micromoles per litre)
TSED (EUXRoOB02 Water Turbidity, Nephelometric Turbidity Units)
CNDC (EUXRoOB02 Water Conductivity, MilliSiemens per centimetre)
CSPD (EUXRoOB02 Water Current Speed, Metres per second)
CDIR (EUXRoOB02 Water Current Direction, Degrees)
TEMP (EUXRoOB02 Water Temperature, Degrees Celsius)
PRES (EUXRoOB02 Water Pressure, Decibars)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


EUXRoOB03 DATA - 2024

Summary:
Data acquired by EUXRoOB03 (Black Sea offshore buoy) in 2024

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CPWC (EUXRoOB03 Chlorophyll Concentration, Micrograms per litre)
DOXY (EUXRoOB03 Oxygen Concentration, Micromoles per litre)
TSED (EUXRoOB03 Water Turbidity, Nephelometric Turbidity Units)
CNDC (EUXRoOB03 Water Conductivity, MilliSiemens per centimetre)
CSPD (EUXRoOB03 Water Current Speed, Metres per second)
CDIR (EUXRoOB03 Water Current Direction, Degrees)
TEMP (EUXRoOB03 Water Temperature, Degrees Celsius)
PRES (EUXRoOB03 Water Pressure, Decibars)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Fluorometry data from a Turner Designs C3 sensor at OBSEA's Besos Buoy (30min average)

Summary:
Data collected by a Turner Designs C3-SN2300642 fluorometer mounted at the Besos Buoy, on top of the OBSEA observatory, 30min average

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CDOM (The quantity of coloured organic compounds in solution in unit volume of any body of water, Parts per billion)
COIL (crude oil in sea water, Parts per billion)
RFUL (refined fuels in sea water, Parts per million)
TEMP (in situ sea water temperature, Degrees Celsius)
CDOM_QC (The quantity of coloured organic compounds in solution in unit volume of any body of water quality control flags)
COIL_QC (crude oil in sea water quality control flags)
RFUL_QC (refined fuels in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Fluorometry data from a Turner Designs C3 sensor at OBSEA's Besos Buoy (full data)

Summary:
Data collected by a Turner Designs C3-SN2300642 fluorometer mounted at the Besos Buoy, on top of the OBSEA observatory, full data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CDOM (The quantity of coloured organic compounds in solution in unit volume of any body of water, Parts per billion)
COIL (crude oil in sea water, Parts per billion)
RFUL (refined fuels in sea water, Parts per million)
TEMP (in situ sea water temperature, Degrees Celsius)
CDOM_QC (The quantity of coloured organic compounds in solution in unit volume of any body of water quality control flags)
COIL_QC (crude oil in sea water quality control flags)
RFUL_QC (refined fuels in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


NEMO-SN1 Observatory CTD data (2002-2003)

Summary:
The dataset contains sea bottom Conductivity, Temperature and Pressure data (about 1 m above the bottom) acquired through a SBE 37-SM installed on SN-1 station. The collection period ranges from October 2002 through February 2003.

cdm_data_type = TimeSeries
VARIABLES:
depth (depth of measurements, m)
longitude (longitude of measurements, degrees_east)
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TEMP (temperature, degree_C)
CNDC (conductivity, MilliSiemens per centimetre)
PRES (pressure, Decibar)
DEPTH_QC (Depth quality flag)
CNDC_QC (Conductivity quality flag)
POSITION_QC (Position quality flag)
TEMP_QC (Temperature quality flag)
TIME_QC (Time quality flag)
PRES_QC (Pressure quality flag)

Istituto Nazionale Geofisica e Vulcanologia - Sez. Roma2


NEMO-SN1 Observatory CTD data (2012-2013)

Summary:
The dataset contains sea bottom Conductivity, Temperature and Pressure data (about 1 m above the bottom) acquired through a SBE 37-SM installed on SN-1 station.

cdm_data_type = TimeSeries
VARIABLES:
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
longitude (longitude of measurements, degrees_east)
TEMP (temperature, degree_C)
CNDC (conductivity, MilliSiemens per centimetre)
PRES (pressure, Decibar)
CNDC_QC (Conductivity quality flag)
PRES_QC (Pressure quality flag)
POSITION_QC (Position quality flag)
TEMP_QC (Temperature quality flag)
TIME_QC (Time quality flag)
DEPTH_QC (Depth quality flag)


NEMO-SN1 Observatory Observatory Pressure Gauge data

Summary:
This sensor measures the hydrostatic (water column) pressure exerted on the sensor resulting from the pressure of water above its position and the atmospheric air pressure acting on the sea surface.

cdm_data_type = TimeSeries
VARIABLES:
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
PRES (pressure, decibar)
TIME_QC (Time quality flag)
POSITION_QC (Position quality flag)
DEPTH_QC (Depth quality flag)
PRES_QC (Pressure quality flag)


Physicochemical data from an SA8065 multiparameter probe at OBSEA's Besos Buoy (30min average)

Summary:
Physicochemical data collected by an SA8065-SN0000 multiparameter probe at the Besos Buoy, on top of the OBSEA observatory, 30min average

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
TEMP (in situ sea water temperature, Degrees Celsius)
CNDC (sea water electrical conductivity, Siemens per metre)
DOXY (saturation of oxygen in sea water, Percent)
ALKY (Minus the log of the hydrogen ion concentration (moles per litre) in the water column., pH units)
WBRX (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species, Millivolts)
TURB (Turbidity of water in the water body, Nephelometric Turbidity Units)
depth_QC (depth of measurements quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
DOXY_QC (saturation of oxygen in sea water quality control flags)
ALKY_QC (Minus the log of the hydrogen ion concentration (moles per litre) in the water column. quality control flags)
WBRX_QC (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species quality control flags)
TURB_QC (Turbidity of water in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


Physicochemical data from an SA8065 multiparameter probe at OBSEA's Besos Buoy (full data)

Summary:
Physicochemical data collected by an SA8065-SN0000 multiparameter probe at the Besos Buoy, on top of the OBSEA observatory, full sensor data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
TEMP (in situ sea water temperature, Degrees Celsius)
CNDC (sea water electrical conductivity, Siemens per metre)
DOXY (saturation of oxygen in sea water, Percent)
ALKY (Minus the log of the hydrogen ion concentration (moles per litre) in the water column., pH units)
WBRX (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species, Millivolts)
TURB (Turbidity of water in the water body, Nephelometric Turbidity Units)
depth_QC (depth of measurements quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
DOXY_QC (saturation of oxygen in sea water quality control flags)
ALKY_QC (Minus the log of the hydrogen ion concentration (moles per litre) in the water column. quality control flags)
WBRX_QC (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species quality control flags)
TURB_QC (Turbidity of water in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


Sentinel ADCP Data at 150m Jun-Oct 2022 in front of Cape St.Vincent, Sagres, PT

Summary:
This dataset contains data collected with a Teledyne RDI Sentinel V100 300 kHz Acoustic Doppler Current Profiler (ADCP), mounted in a upward facing subsurface buoy.
Data are collected every hour for 3.0m depth bins. Blank 2.0m

cdm_data_type = Point
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
POSITION_QC (quality flag for LATITUDE and LONGITUDE)
SVEL (Sound velocity in sea water, Metres per second)
BINNUMBR (Bin number)
HDNG (Heading, degrees)
PTCH (Pitch, degrees)
ROLL (degrees)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag for TEMP)
HCSP (Horizontal current speed, Metres per second)
HCSP_QC (quality flag for HCSP)
HCDT (Current to direction relative true north, Degrees True)
HCDT_QC (quality flag for HCDT)
EWCT (West-east current component, Metres per second)
EWCT_QC (quality flag for EWCT)
NSCT (South-north current component, Metres per second)
NSCT_QC (quality flag for NSCT)
VSP (Bottom-up current component, Metres per second)
VSP_QC (quality flag for VSP)
LERR (Velocity error, Metres per second)
TNIH01 (Echo intensity beam 1, count)
TNIH02 (Echo intensity beam 2, count)
TNIH03 (Echo intensity beam 3, count)
... (9 more variables)

Algarve Centre of Marine Sciences (CCMAR), Portuguese Institute for Sea and Atmosphere(IPMA)


Sentinel ADCP Data at 150m May-June 2021 in front of Cape St. Vincent, Sagres, PT


SmartBay Observatory NRT sensor feed - 1 day average - all sensors

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This dataset comprises daily mean of data collected from the SmartBay Observatory site using an Idronaut Ocean-Seven 304 plus CTD, Sea_Bird SBE16plus CT, Sea-Bird SBE43 dissolved oxygen sensor, WetLabs ECO-FL, Contros pCO2, Kongsberg ADCP and icListen hydrophone sensors.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
transect (Named transect of repeat stations, Not applicable)
station_id (Station name, Not applicable)
site_bathy_depth (sea floor depth below sea surface, m)
... (58 more variables)


SmartBay Observatory NRT sensor feed - 1 hour average - all sensors

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This dataset comprises hourly mean of data collected from the SmartBay Observatory site using an Idronaut Ocean-Seven 304 plus CTD, Sea_Bird SBE16plus CT, Sea-Bird SBE43 dissolved oxygen sensor, WetLabs ECO-FL, Contros pCO2, Kongsberg ADCP and icListen hydrophone sensors.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
transect (Named transect of repeat stations, Not applicable)
station_id (Station name, Not applicable)
site_bathy_depth (sea floor depth below sea surface, m)
... (58 more variables)


SmartBay Observatory NRT sensor feed - 15 minute average - all sensors

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This dataset comprises 15 minute mean of data collected from the SmartBay Observatory site using an Idronaut Ocean-Seven 304 plus CTD, Sea_Bird SBE16plus CT, Sea-Bird SBE43 dissolved oxygen sensor, WetLabs ECO-FL, Contros pCO2, Kongsberg ADCP and icListen hydrophone sensors.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
transect (Named transect of repeat stations, Not applicable)
station_id (Station name, Not applicable)
site_bathy_depth (sea floor depth below sea surface, m)
... (58 more variables)


SmartBay Observatory NRT sensor feed - ADCP data

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. A Teledyne RDI Workhorse Broadband 600KHz acoustic Doppler current profiler (ADCP ) is mounted on the observatory infrastructure. It is approximately two metres above the seabed, looking up towards the sea surface. Data are collected every minute for 1.0m depth bins from approx. 1 metre above the instrument to the surface. Data are collected in RDI's PD0 binary format (more information is available from the link: http://spiddal.marine.ie/data.html#adcp). The .PD0 raw files are processed as they are collected and the real time values for the Near Surface and Mid Water Current Speeds and Directions are extracted. The extracted values are displayed in near-real-time on smartbay.marine.ie. The processed data is also provided via an ERDDAP data server allowing the data to be downloaded in a range of open formats. The sensor is deployed on the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
... (42 more variables)


SmartBay Observatory NRT sensor feed - Contros pCO2 data

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. A CONTROS HydroC CO2 sensor was installed on the SmartBay cabled observatory in June 2020. The sensor is connected to the fibre and power cable and is transmitting real time high frequency partial pressure of carbon dioxide {CO2 CAS 124-38-9} {pCO2} data in the water body at 25 m depth on a continuous basis. The sensor is deployed on the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
transect (Named transect of repeat stations, Not applicable)
... (12 more variables)


SmartBay Observatory NRT sensor feed - Hydrophone Sound Pressure Level data

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This dataset comprises of processed acoustic data that has been collected from the SmartBay Observatory using an icListen HF Smart Hydrophone – a digital hydrophone that processes and stores acoustic data. The dataset comprises of processed data, collected from the SmartBay Observatory since its installation in 2015. The wide frequency range hydrophone is installed on a separate lander approximately 30m away from the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water at 53 degrees 13.640'N 9 degrees 15.979'W.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
... (22 more variables)


SmartBay Observatory NRT sensor feed - Idronaut CTD data

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This CTD (Conductivity, Temperature, Depth) and Oxygen Dataset comprises of the raw data that is collected from the Galway Observatory site using an Idronaut Ocean-Seven 304 plus Conductivity-Temperature-Depth (CTD) sensor probe. The sensor measures the temperature and conductivity of the seawater. The conductivity is used to calculate an estimate of the salinity. The pressure exerted by the seawater above is used to calculate the depth of the sensor, and these parameters are also used to estimate the speed of sound within the sea. The Ocean-Seven 304 Plus CTD has also been equipped with a polarographic IDRONAUT dissolved oxygen sensor which measure the dissolved oxygen concentration of the seawater. The sensor is deployed on the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
... (28 more variables)


SmartBay Observatory NRT sensor feed - SBE16plus CTD data

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This CTD (Conductivity, Temperature, Depth) and Oxygen Dataset comprises of the raw data that is collected from the Galway Observatory site using a SeaBird 16plus Conductivity-Temperature-Depth (CTD) sensor probe. The sensor measures the temperature and conductivity of the seawater. The conductivity is used to calculate an estimate of the salinity. The pressure exerted by the seawater above is used to calculate the depth of the sensor, and these parameters are also used to estimate the speed of sound within the sea. The SBE16plus CTD has also been equipped with a SBE43 dissolved oxygen sensor which measures the dissolved oxygen concentration of the seawater. The sensor is deployed on the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
... (27 more variables)


SmartBay Observatory NRT sensor feed - WetLabs ECO-FLNTU fluorescence and turbidity data

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. A WetLabs ECO-FLNTU is installed on the observatory infrastructure. It measures the fluorescence of the seawater to give an estimate of the volume of chlorophyll present (indicative of the amount of phytoplankton in the seawater) and it measures turbidity, or the 'cloudiness' of the seawater, caused by the presence of particles such as sediment from the seabed suspended in the water. The sensor is deployed on the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
... (15 more variables)


SPL data from a Naxys Hydrophone at OBSEA (30min average)

Summary:
Sound Pressure Level (ambient noise) from hydrophone data collected at OBSEA by a Naxys Ethernet 02345 Hydrophone and processed in real-time using the SWE Bridge software, 30min average. The SPL values are calculated with a time-window of 10 seconds.

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
SPL_ALL
SPL_63 (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_125 (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_2000 (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_ALL_QC
SPL_63_QC (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_125_QC (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_2000_QC (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


SPL data from a Naxys Hydrophone at OBSEA (full data)

Summary:
Sound Pressure Level (ambient noise) from hydrophone data collected at OBSEA by a Naxys Ethernet 02345 Hydrophone and processed in real-time using the SWE Bridge software, full data.  The SPL values are calculated with a time-window of 10 seconds.

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
SPL_ALL
SPL_63 (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_125 (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_2000 (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_ALL_QC
SPL_63_QC (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_125_QC (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_2000_QC (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Station M hydrography and CO2 data

Summary:
This dataset contains data from a single array mooring covering the depths between 500 m and 2000 m (bottom) at Station M (OWSM) in the Norwegian Seas located at 66 N, 2 E. Measurements frequency is 1/1 hr for the hydrography (temperature, salinity, pressure) and 1/12 hr for the carbon measurements.At 800 m and 1200 m nominal depth, the pressure has been calculated based on distance between the SBE sensors. The CO2 sensor data (at 500 m nominal depth) are validated by comparing the values towards calculated pCO2 from discrete Dissolved Inorganic Carbon (DIC) and Total Alkalinity (TA) taken multiple times a year. Calibrated values are available. Data from 2020 onwards are part of the NorEMSO project. The NorEMSO data is part of EMSO-ERIC.

cdm_data_type = TimeSeries
VARIABLES:
SENSOR_ID (Instrument Id)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (Nominal depth of measurements, m)
PRES (pressure, decibar)
PRES_QC (pressure quality flag)
PSAL (salinity, PSU)
PSAL_QC (salinity quality flag)
CNDC (conductivity, mS/cm)
CNDC_QC (conductivity quality flag)
TEMP (temperature, degree_C)
TEMP_QC (temperature quality flag)
POSITION_QC (Position quality flag)
FCO2 (fugacity of CO2 in water, microatmospheres)
FCO2_QC (fugacity of CO2 quality flag)
PREM (pressure at CO2 sensor equilibrator membrane, millibars)
PREM_QC (pressure at CO2 sensor equilibrator membrane quality flag)
DEPTH_QC (Depth quality flag)


Svinøy North hydrography and currents data.

Summary:
This dataset contains current and hydrography data from a single array mooring (Svinøy North) located in the Svinøy Section current meter mooring array at 62.83 N, 4.36 E. It's part of the long-term monitoring timeseries of the Norwegian Atlantic Slope Current and transport estimation that started in 1995. Data from 2020 onwards are part of the NorEMSO project.

cdm_data_type = TimeSeries
VARIABLES:
SENSOR_ID (Instrument Id)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (Nominal depth of measurements, m)
CDIR (Current direction as degrees from North, degree)
CDIR_QC (Current direction as degrees from North quality flag)
PSAL (salinity, PSU)
PSAL_QC (salinity quality flag)
PRES (pressure, decibar)
PRES_QC (pressure quality flag)
CSPD (Current speed, m/s)
CSPD_QC (Current speed quality flag)
TEMP (temperature, degree_C)
TEMP_QC (temperature quality flag)
POSITION_QC (Position quality flag)
DEPTH_QC (Depth quality flag)


Svinøy South hydrography and currents data

Summary:
This dataset contains current and hydrography data from a single array mooring (Svinøy South) located in the Svinøy Section current meter mooring array at 62.81 N, 4.27 E. It's part of the long-term monitoring timeseries of the Norwegian Atlantic Slope Current and transport estimation that started in 1995. Data from 2020 onwards are part of the NorEMSO project.

cdm_data_type = TimeSeries
VARIABLES:
SENSOR_ID (Instrument Id)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (Nominal depth of measurements, m)
CDIR (Current direction as degrees from North, degree)
CDIR_QC (Current direction as degrees from North quality flag)
PSAL (salinity, PSU)
PSAL_QC (salinity quality flag)
PRES (pressure, decibar)
PRES_QC (pressure quality flag)
CSPD (Current speed, m/s)
CSPD_QC (Current speed quality flag)
TEMP (temperature, degree_C)
TEMP_QC (temperature quality flag)
POSITION_QC (Position quality flag)
DEPTH_QC (Depth quality flag)


Vertical Wave Profiler Data 0-10m April 2022 at Cacela Velha Artificial Reef, PT

Summary:
Wirewalker profiler 0-10m (Conductivity, Temperature, Depth (CTD), Tu, Chl-a, O2) - Cacela artificial reef. The dataset contains water column parameters acquired through a 6 channel RBRconcerto CTD, equipped with two Turner Designs Cyclops 7F sensors (Chl-a and Turbidty) and one RBRcoda3 T.ODO (optical dissolved oxygen).
Sensors are installed in a wave powered vertical profiler (Wirewalker) travelling from about 1 m bellow surface to maximum 10 m depth at an variable speed. Upward cast (free floating) is fairily constant at ~0.4 m/s.
Sampling rate is 2 Hz ascending, and 5 s descendending. Complete profiles are expected to be 40 s to 180 s (depending on wave conditions).
The Wirewalker was deployed moored on the Cacela artificial reef, ~7 nautical miles SW of Vila Real de Santo AntÃ³nio, Portugal.
Measured channels: Conductivity, Temperature, Pressure, Chlorophyll a, Temperature, Dissolved O2 concentration, Turbidity.
Derived channels: Sea pressure, Depth, Salinity, Speed of sound, Specific conductivity, Dissolved O2 saturation, Density anomaly

cdm_data_type = Point
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
depth (m)
DEPH_QC (quality flag for DEPH)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
POSITION_QC (quality flag for LATITUDE and LONGITUDE)
TEMP (Sea temperature, Degrees Celsius)
TEMP_QC (quality flag for TEMP)
TEMP_DOXY (Sea temperature, Degrees Celsius)
TEMP_DOXY_QC (quality flag for TEMP_DOXY)
CNDC (Electrical conductivity, Siemens per metre)
CNDC_QC (quality flag for CNDC)
PSAL (Practical salinityÂ of the water body, Dimensionless)
... (16 more variables)


Vertical Wave Profiler Data 0-150m Jun-Oct 2022 in front of Cape St. Vincent, Sagres, PT

Summary:
The dataset contains water column parameters acquired through a 6 channel RBRconcerto Conductivity, Temperature, Depth (CTD), equipped with two Turner Designs Cyclops 7F sensors (Chl-a and Turbidty) and one RBRcoda3 T.ODO (optical dissolved oxygen).
The sensors are installed in a wave powered vertical profiler (Wirewalker) travelling from about 1 m below surface to 150 m depth at an variable speed: upward cast (free floating) ~0.5 m/s; downward cast (wave motion) ~0.4 m/s (depending on wave conditions).
Sampling rate is 2 Hz ascending, and 10 Hz descending. Four complete profiles are expected to be performed every hour.
Measured channels: Conductivity, Temperature, Pressure, Chlorophyll a, Temperature, Dissolved O2 concentration, Turbidity.
Derived channels: Sea pressure, Depth, Salinity, Speed of sound, Specific conductivity, Dissolved O2 saturation, Density anomaly

cdm_data_type = Point
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
depth (m)
DEPH_QC (quality flag for DEPH)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
POSITION_QC (quality flag for LATITUDE and LONGITUDE)
TEMP (Sea temperature, Degrees Celsius)
TEMP_QC (quality flag for TEMP)
TEMP_DOXY (Sea temperature, Degrees Celsius)
TEMP_DOXY_QC (quality flag for TEMP_DOXY)
CNDC (Electrical conductivity, Siemens per metre)
CNDC_QC (quality flag for CNDC)
PSAL (Practical salinityÂ of the water body, Dimensionless)
PSAL_QC (quality flag for PSAL)
PRST (Sea pressure, Decibars)
PRST_QC (quality flag for PRST)
... (13 more variables)


W1M3A data (201401-201506)

Summary:
Data from W1M3A observatory (012014-062015)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


W1M3A data (201506-201606)

Summary:
Data from W1M3A observatory (062015-062016)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


W1M3A data (201607-201705)

Summary:
Data from W1M3A observatory (072016-052017)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


W1M3A data (201705-201806)

Summary:
Data from W1M3A observatory (052017-062018)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


W1M3A data (202010-202107)

Summary:
Data from W1M3A observatory (102020-072021)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (Chlorophyll-a fluorescence quality flag)
TUR4 (Turbidity of water in the water body, NTU)
TUR4_QC (Turbidity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
... (7 more variables)


W1M3A data (202107-202204)

Summary:
Data from W1M3A observatory (072021-042022)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (Chlorophyll-a fluorescence quality flag)
TUR4 (Turbidity of water in the water body, NTU)
TUR4_QC (Turbidity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
... (7 more variables)


W1M3A data (202310-202405)

Summary:
Data from W1M3A observatory (102023-052024)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, MilliSiemens per centimetre)
CNDC_QC (Conductivity quality flag)
DOX1 (Dissolved oxygen, Millilitres per litre)
DOX1_QC (Conductivity quality flag)
FLU2 (Chlorophyll-a fluorescence, Milligrams per cubic metre)
FLU2_QC (Chlorophyll-a fluorescence quality flag)
TUR4 (Turbidity of water in the water body, Nephelometric Turbidity Units)
TUR4_QC (Turbidity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
... (9 more variables)


W1M3A data (202407-...)

Summary:
Data from W1M3A observatory (072024-...)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
POSITION_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
sensor_id
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, MilliSiemens per centimetre)
CNDC_QC (Conductivity quality flag)
DOX1 (Dissolved oxygen, Millilitres per litre)
DOX1_QC (Conductivity quality flag)
FLU2 (Chlorophyll-a fluorescence, Milligrams per cubic metre)
FLU2_QC (Chlorophyll-a fluorescence quality flag)
TUR4 (Turbidity of water in the water body, Nephelometric Turbidity Units)
TUR4_QC (Turbidity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
... (12 more variables)


Wave data from an AWAC-AST 1 MHz ADCP at OBSEA

Summary:
Wave data collected and processed by an AWAC-SN5931-AST 1 MHz at OBSEA

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
VHM0 (spectral significant wave height of waves by acoustic doppler wave array, Metres)
VAVH (Wave height mean of waves (highest one third) on the water body by acoustic doppler wave array, Metres)
VH110 (Wave height mean of waves (highest one tenth) on the water body by acoustic doppler wave array, Metres)
VZMX (wave height maximum of waves on the water body by acoustic doppler wave array, Metres)
VTM02 (period mean of waves on the water body by acoustic doppler wave array , Seconds)
VTPK (Period at spectral maximum of waves (peak period Tp) on the water body by acoustic doppler wave array, Seconds)
VTZA (Zero-crossing period of waves {Tz} on the water body by acoustic doppler wave array, Seconds)
VPED (Direction (from) at spectral maximum of waves on the water body by acoustic doppler wave array, Degrees)
VMDR (Direction (from) mean of waves (mean wave direction) on the water body by acoustic doppler wave array, Degrees)
UNDX (Unidirectivity index of waves on the water body by acoustic doppler wave array, Dimensionless)
VHM0_QC (spectral significant wave height of waves by acoustic doppler wave array quality control flags)
VAVH_QC (Wave height mean of waves (highest one third) on the water body by acoustic doppler wave array quality control flags)
VH110_QC (Wave height mean of waves (highest one tenth) on the water body by acoustic doppler wave array quality control flags)
VZMX_QC (wave height maximum of waves on the water body by acoustic doppler wave array quality control flags)
VTM02_QC (period mean of waves on the water body by acoustic doppler wave array  quality control flags)
VTPK_QC (Period at spectral maximum of waves (peak period Tp) on the water body by acoustic doppler wave array quality control flags)
VTZA_QC (Zero-crossing period of waves {Tz} on the water body by acoustic doppler wave array quality control flags)
VPED_QC (Direction (from) at spectral maximum of waves on the water body by acoustic doppler wave array quality control flags)
VMDR_QC (Direction (from) mean of waves (mean wave direction) on the water body by acoustic doppler wave array quality control flags)
UNDX_QC (Unidirectivity index of waves on the water body by acoustic doppler wave array quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)